Abstract:The exceptional properties of methanol, such as its high octane number and latent heat of evaporation, make it an advantageous fuel for efficient utilization in dual-fuel combustion techniques. The aim of this study is to investigate the effect of direct methanol injection timing on the combustion, performance and emission characteristics of a dual-fuel spark ignition engine at different injection pressures. We conducted four different direct injection pressure tests ranging from 360° ahead to 30° CA ahead at 30° CA intervals. The experimental results indicate that regardless of the injection pressure, altering the methanol injection timing from −360° to −30° CA ATDC leads to distinct combustion behavior and changes in the combustion phase. Initially, as the injection timing is delayed, the combustion process accelerates, which is followed by a slower combustion phase. Additionally, the combustion phase itself experiences a delay and then advances. Regarding performance characteristics, both the brake thermal efficiency (BTE) and exhaust gas temperature (EGT) exhibit a consistent pattern of first increasing and then decreasing as the injection timing is delayed. This suggests that there is an optimal injection timing window that can enhance both the engine's efficiency and its ability to manage exhaust temperature. In terms of emissions, there are different trends in this process due to the different conditions under which the individual emissions are produced, with CO and HC showing a decreasing and then increasing trend, and NOx showing the opposite trend. In conclusion, regardless of the injection pressure employed, adopting a thoughtful and well-designed injection strategy can significantly improve the combustion performance and emission characteristics of the engine. The findings of this study shed light on the potential of methanol dual-fuel combustion and provide valuable insights for optimizing engine operation in terms of efficiency and emissions control.

Dual-Fuel Spark Ignition (DFSI) Combustion Fuelled with Different Alcohols and Gasoline for Fuel Efficiency

Comparative Study on Alcohols–gasoline and Gasoline–alcohols Dual-Fuel Spark Ignition (DFSI) Combustion for High Load Extension and High Fuel Efficiency

Methanol-gasoline DFSI (Dual-Fuel Spark Ignition) Combustion with Dual-Injection for Engine Knock Suppression

Methanol-gasoline Dual-fuel Spark Ignition (DFSI) Combustion with Dual-Injection for Engine Particle Number (PN) Reduction and Fuel Economy Improvement

Comparative study on alcohol–gasoline and gasoline–alcohol Dual-Fuel Spark Ignition (DFSI) combustion for engine particle number (PN) reduction

Dual-Injection As a Knock Mitigation Strategy Using Pure Ethanol and Methanol

Dual-injection: the Flexible, Bi-Fuel Concept for Spark-Ignition Engines Fuelled with Various Gasoline and Biofuel Blends

Split-Injection Strategies under Full-Load Using DMF, A New Biofuel Candidate, Compared to Ethanol in a GDI Engine

Optimising the Particulate Emission Characteristics of a Dual-Fuel Spark Ignition Engine by Changing the Gasoline Direct Injection Strategy

Experimental and numerical study on a SI engine fueled with gasohol and dissociated methanol gas blends at lean conditions

Controlled Ssci with Moderate End-Gas Auto-Ignition for Fuel Economy Improvement and Knock Suppression

Experiment of a gasoline engine fueled with gasoline-DMF blends and gasoline-alcohol blends

Simulation Study on the Impact of Injection Strategies on the Performance of Methanol–Gasoline Dual-Fuel Engines

Ignition Timing Sensitivities of Oxygenated Biofuels Compared to Gasoline in a Direct-Injection SI Engine

To achieve high methanol substitution ratio and clean combustion on a diesel/methanol dual fuel engine: A comparison of diesel methanol compound combustion (DMCC) and direct dual fuel stratification (DDFS) strategies

Experimental Investigation on the Effects of Direct Injection Timing on the Combustion, Performance and Emission Characteristics of Methanol/Gasoline Dual-Fuel Spark Turbocharged Ignition (DFSI) Engine with Different Injection Pressures under High Load

Effect of Spark Timing and Load on A Disi Engine Fuelled with 2,5-Dimethylfuran

Combustion performance of 2,5-dimethylfuran blends using dual-injection compared to direct-injection in a SI engine

A review on performance, combustion and emission of diesel and alcohols in a dual fuel engine

Investigation of Compression Ratio and Fuel Effect on Combustion and PM Emissions in a DISI Engine

Effects of Combustion Phasing, Injection Timing, Relative Air-Fuel Ratio and Variable Valve Timing on Si Engine Performance and Emissions Using 2,5-Dimethylfuran