Experimental and numerical studies on the sample area and skin effect of the three-rod time domain reflectometry probe

tony l t zhan,q y mu,y m chen
DOI: https://doi.org/10.1080/19648189.2015.1039659
2016-01-01
European Journal of Environmental and Civil engineering
Abstract:The sample area and skin effect of the widely used three-rod time domain reflectometry (TDR) probe is not fully understood. The seepage analysis software was adopted to compute the electrostatic potential field surrounding the TDR probe and a quantitative assessment of the sample area and skin effect for probes that varied in design with respect to rod diameter (D) and rod spacing (L) was conducted. The effectiveness of the numerical method was demonstrated by experiments designed to determine the extent of the sample area for the three-rod probe with a rod diameter of 6mm and a rod spacing of 30mm. The main findings from the experimental and numerical studies are as follows. The electrical conductivity of the test medium has a negligible effect on the sample area of the three-rod probe when it is limited within 150ms/m. The sample area (S-f=90%) for the three-rod probe can be represented as an ellipse with a semi-major axis length equal to L+D/2. The magnitude of the sample area is predominantly determined by the rod spacing for the dimension ranges under consideration (D=4-8mm; L=15-60mm), and it can be predicted by a quadratic equation. The extent of the skin effect (S-f=50%/S-f=90%) for the three-rod probe is dependent on the ratio of the rod spacing to the rod diameter (L/D) and the quantitative skin effect can be also evaluated by a quadratic equation. On the basis of these findings, a design procedure is proposed to determine the optimal rod diameter (D) and rod spacing (L) for a three-rod TDR probe.
What problem does this paper attempt to address?