Abstract:This study was designed to prepare functionalized multiwalled carbon nanotubes (MWNTs-COOH) incorporated chitosan membrane for separation of ethanol/water mixtures by pervaporation. The pristine MWNTs were treated by mixed acid and then functionalized by diisobutyryl peroxide. The structure and property of the functionalized MWNTs were characterized by Fourier transform infrared and Raman spectroscopies and transmission electron microscopy. A series of functionalized MWNTs incorporated chitosan membranes were prepared by solution blending method. The swelling degree of the resulting membranes. in ethanol/water mixtures was 6 times that of the pristine chitosan membrane. The permeation flux of the membranes increased significantly with increasing functionalized MWNTs content in blend membrane matrix in pervaporation. On the basis of the experiments of sorption equilibrium, the solubility and the diffusion coefficient of membranes in water, ethanol, and 90% ethanol/water mixtures were obtained. Compared with the calculated diffusion coefficient (D-90), the measured diffusion coefficient (D-90(T)) in 90% ethanol/water mixtures was higher, taking M(2) for an example, D-90 was 0.193 x 10(-6) m(2)/s, and D-90(T) was 0.41 x 10(-6) m(2)/s, which indicated the functionalized MWNTs were more prone to increased water permeation when ethanol and water penetrated into the membrane simultaneously. In addition, effects of MWNTs content in the membrane matrix and operating temperature on pervaporation performances were investigated. After introducing functionalized MWNTs, the Arrhenius activation parameters for the total permeation decreased from 28.15 to 12.91 kJ/mol, which indicated that the carbon nanotubes filled membranes were easier to penetrate and exhibited higher flux performance than a pristine membrane.

Pervaporation separation of water‐ethanol through modified chitosan membranes, II. Carboxymethyl, carboxyethyl, cyanoethyl, and amidoxime chitosan membranes

Pervaporation separation of water—ethanol through modified chitosan membranes. IV. Phosphorylated chitosan membranes

Modified Chitosan Membranes for Pervaporation

Specificity Enzymatic Preparation and Performance Characterization of Porous Chitosan Membranes

Pervaporation Performance of Β-Chitosan Membrane for Water/Alcohol Mixtures

Pervaporation of Water-Ethanol Through Poly(vinyl Alcohol)/chitosan Blend Membrane

Pervaporation of Ionically Surface Crosslinked Chitosan Composite Membranes for Water-Alcohol Mixtures

Pervaporation separation of water/alcohol mixtures through hydroxypropylated chitosan membranes

Preparation and Pervaporation Property of Chitosan Membrane with Functionalized Multiwalled Carbon Nanotubes

Preparation and characterization of polyelectrolyte complex membranes bearing alkyl side chains for the pervaporation dehydration of alcohols

Pervaporation of ethylene glycol–water mixtures: I. Pervaporation performance of surface crosslinked chitosan membranes

Novel carbon nanotube/chitosan hybrid membranes for the separation of ethanol/water mixtures by pervaporation

Pervaporation Separation of Methanol/Methyl T-Butyl Ether Through Chitosan Composite Membrane Modified with Surfactants

Comprehensive Analysis on Anomalous Phenomenon of Ethanol-Soluble PVB Membrane for Ethanol Recovery Via Pervaporation

Effect of Deacetylation Degree in Chitosan Composite Membranes on Pervaporation Performance

Pervaporation and Properties of Chitosan Poly(Acrylic Acid) Complex Membranes

Pervaporation of Water-Ethanol Mixtures Through Poly(Acrylonitrile-Co-Acrylic Acid) Membranes

Separation of Alcohol-Water Mixture by Pervaporation Through A Novel Natural Polymer Blend Membrane-Chitosan/Silk Fibroin Blend Membrane

Study of a New Pervaporation Membrane Part I. Preparation and Characteristics of the New Membrane

Preferential Separation of Ethanol from Aqueous Solution Through Hydrophilic Polymer Membranes

Chitosan-silica complex membranes from sulfonic acid functionalized silica nanoparticles for pervaporation dehydration of ethanol-water solutions.