Abstract:Cross-flow transition over a delta wing is systematically studied in a Mach 6.5 hypersonic wind tunnel, employing the Rayleigh scattering flow visualisation, high-speed schlieren and fast-response pressure sensors. Direct numerical simulations and analysis based on linear stability theory under the same flow conditions are applied to analyse the transition mechanism. Three unstable modes are identified: the travelling cross-flow instabilities, the second mode and the low-frequency waves. It is shown that the travelling cross-flow vortices first appear in the cross-flow region near the leading edge of the model. These vortices can modulate the mean profile of the flow, which benefits the growth of second mode. A phase-locked interaction mechanism transfers energy from the cross-flow instabilities to the high-frequency second mode, leading to amplification at the expense of the cross-flow instability. As the second mode grows to a critical amplitude, it triggers a -type secondary instability within a similar frequency range, which introduces secondary finger-like structures connecting to the cross-flow vortex. It is further found that the generation of these finger-like structures is related to the expansion and compression of the second mode. These finger vortices further evolve along the streamwise direction into low-frequency waves and corresponding hairpin-like structures that finally trigger turbulence. An interaction mechanism likely exists between the secondary instability and the low-frequency waves, since their phase speeds are approaching each other. These observations of the interaction mechanism are consistent with those of previous studies on hypersonic boundary layers (Zhang et al., Phys. Fluids, vol. 32 (7), 2020, 071702; Li et al., Phys. Fluids, vol. 32 (5), 2020, 051701).

Improved-Delayed-Detached-Eddy Simulation of cavity-induced transition in hypersonic boundary layer

Simulation of Transition Triggered by Isolated Roughness in Hypersonic Boundary Layer

Improved Delayed Detached-Eddy Simulation of Transonic and Supersonic Cavity Flows

Transition Triggered by Isolated Roughness Element Using Improved Delayed Detached Eddy Simulation Model

Direct Numerical Simulation of Hypersonic Transition Induced by an Isolated Cylindrical Roughness Element

Simulations of Transition and Separation Past a Wind-Turbine Airfoil Near Stall

Mechanism of Width Effects on Cavity-Induced Transitions at Hypersonic Speed Using Direct Numerical Simulation

Direct numerical simulation of hypersonic transition induced by a cylindrical roughness element

Depth Effects on the Cavity Induced Transition at Hypersonic Speed by DNS

Numerical Investigations of Hypersonic Transition and Massive Separation Past Orion Capsule by DDES-Tr

Numerical Studies of Reverse Flows Controlled by Undulating Leading Edge

Transition Effect On The Vertical Flow Past The Vfe-2 Delta Wing With Rounded Leading Edge

An improved laminar–turbulent transition cavitation model using the IDDES method

Hypersonic Transition Induced by Three Isolated Roughness Elements on a Flat Plate

Boundary layer transition of hypersonic flow over a delta wing

Experimental Investigation on Forced Boundary-Layer Transition in Shock Tunnel

Numerical Investigation of Unsteady Vortex Breakdown Past 80°/65° Double-Delta Wing

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Gap-induced Transition Via Oblique Breakdown at Mach 6

Study Of Shock/Blade Tip Leakage Vortex/Boundary Layer Interaction In A Transonic Rotor With Iddes Method

Roughness-Induced Transition in Supersonic Boundary Layers with Wall Heating and Cooling Effects