Abstract:Localized stress concentrations at fiber ends in short fiber-reinforced polymer composites (SFRCs) significantly affect their mechanical properties. Our research targets these stress concentrations by embedding nitro-spiropyran (SPN) mechanophores into the polymer matrix. SPN mechanophores change color under mechanical stress, allowing us to visualize and quantify stress distributions at the fiber ends. We utilize glass fibers as the reinforcing material and employ confocal fluorescence microscopy to detect color changes in the SPN mechanophores, providing real-time insights into the stress distribution. By combining this mechanophore-based stress sensing with finite element analysis (FEA), we evaluate localized stresses that develop during a single fiber pull-out test near different fiber end geometries—flat, cone, round, and sharp. This method precisely quantifies stress distributions for each fiber end geometry. The mechanophore activation intensity varies with fiber end geometry and pull-out displacement. Our results indicate that round fiber ends exhibit more gradual stress transfer into the matrix, promoting effective stress distribution. Also, different fiber end geometries lead to distinct failure mechanisms. These findings demonstrate that fiber end geometry plays a crucial role in stress distribution management, critical for optimizing composite design and enhancing the reliability of SFRCs in practical applications. By integrating mechanophores for real-time stress visualization, we can accurately map quantified stress distributions that arise during loading and identify failure mechanisms in polymer composites, offering a comprehensive approach to enhancing their durability and performance.

Experimental Study on the Fiber Pull-Out of Composites Using Digital Gradient Sensing Technique

Experimental Investigation on Curing Stress in Polymer Composite Using Digital Gradient Sensing Technique

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

STUDY OF INTERFACIAL STRESS OF SINGLE-FIBER COMPOSITE BY PHOTO-ELASTIC EXPERIMENT

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

Interfacial Stress Transfer Behavior in a Specially-Shaped Fiber/matrix Pullout Test

Study on single-fiber pull-out method for evaluating interfacial strength in CFRP

STUDY ON THE FIBER-REINFORCED CONCRETE PULL-OUT TEST USING DIGITAL IMAGE CORRELATION METHOD

Analytical Solution and Experimental Verification of Pullout Force of Twisted Steel Fibers in Ultra-High Performance Concrete

Analyses of the Micromechanics of Stress Transfer in Single- and Multi-Fiber Pull-Out Tests

Experimental and 3D Numerical Modeling on Effect of Embedment Depth on Performance of Twin Fibers Pull out Test

Visualizing Fiber End Geometry Effects on Stress Distribution in Composites Using Mechanophores

Raman Measurements of Kevlar-29 Fiber Pull-out Test at Different Strain Levels

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation

EXPERIMENTAL STUDY ON STRAIN SENSING OPTICAL FIBER-SOIL INTERFACIAL PROPERTIES CONSIDERING INFLUENCE OF EMBEDMENT LENGTH

Mechanism of Functional Responses to Loading of Carbon Fiber Reinforced Cement-Based Composites

Comparison of the Stress Transfer in Single- and Multi-Fiber Composite Pull-out Tests

Stress transfer of a Kevlar 49 fiber pullout test studied by micro-Raman spectroscopy.

Experimental study on pullout performance of sensing optical fibers in compacted sand

In-Situ Strain Measurements in Composites During Fatigue Testing Using Optical Fibre Bragg Gratings and A Portable Ccd Detection System