Abstract:An investigation of the laminar flow and enhanced heat transfer rate through a triangular array of cylinders embedded in a fluid-saturated porous media is considered. Mixed convection covering forced convection cases has been studied using a finite-volume approach considering the local thermal equilibrium model. Darcy–Brinkman–Forchheimer momentum equations are used to characterize the porous media in question. The study is constrained to the low and intermediate Peclet number ( Re = 5 to 40 , Pr = 50) and high range of Darcy number ( Da = 10 −3 to 10 −1 ) for different cylinder spacings (0.7 ≤ φ ≤ 0.99). It is anticipated that porous media would enhance heat transfer, but it derives a multiple order in pressure drop indubitably not desirable in many heat applications. Investigation reveals that both mean drag coefficient ( C D ) and Nusselt number ( Nu ) are strong functions of Da and φ ; however, the influence of the buoyancy parameter is mainly witnessed in higher permeability levels and high Peclet numbers. The study also details the effect of governing parameters on mean gap velocities and pressure coefficients. Surprisingly, recirculation wakes exist for the lowest cylinder spacing ( φ = 0.7) in high fluid momentum. Low φ and high permeability are desirable in a forced convection regime, whereas both φ and Da should be high in the case of mixed convection. This article also quantifies the combined effect of the Darcy number and buoyancy parameter on the heat-transfer enhancement ratio. A maximum of 112% increase in Nu for φ = 0.7 and 452% for φ = 0.99 are reported at Da = 10 −1 , but at the cost of higher pressure drop in the latter case.

Investigating effects of sphere blockage ratio on the characteristics of flow and heat transfer in a sphere array

3D measurements and numerical computations of heat transfer coefficients on spheres in an array

Heat Transfer Coefficient Distributions on Sphere Surface in Pebble Bed Core Using Different Turbulence Models

A Fundamental-Study of the Heat-Transfer and Flow Situation Around Spacers (A Single Row of Several Cylindrical Rods in Cross Flow)

A Three-Dimensional Fictitious Domain Method for Direct Numerical Simulations of Particle-Laden Flows with Heat Transfer

A fundamental study of the heat transfer and flow situation around a spacer (In the case of a circular cylinder as a spacer.

Study on LED array heat transfer under natural convection based on CFD

Effects of a Single Cubic-type Spacer on the Local Heat Transfer and the Flow in a Parallel Plate Duct.

Fundamental study of heat transfer and flow situation around a spacer (in the case of a cylindrical rod as a spacer)

Investigating Effects of Bcc and Fcc Arrangements on Flow and Heat Transfer Characteristics in Pebbles Through Cfd Methodology

Novel experimental–numerical study on inverse heat transfer by free convection and conduction for diamond-arranged tubes in a hot box

A numerical investigation on heat transfer characteristics of a particle cluster in fluid with variable properties

Analysis of the laminar flow and enhanced heat transfer rate through a triangular array of cylinders embedded in a fluid-saturated porous media with mixed convection

The numerical investigation of the thermal–hydraulic behavior in a 3 × 3 rod bundle with spacer grids

Numerical investigation of laminar natural convective heat transfer from a horizontal triangular cylinder to its concentric cylindrical enclosure

Research on hydrodynamics and heat transfer for fluid flow around heating spheres in tandem

Direct numerical simulation of the flow around a sphere immersed in a flat-plate turbulent boundary layer

The experiment investigation of heat transfer characteristics through channel bounded by parallel plates filled with sphere padding

A Parametric Study of Prandtl Number Effects on Laminar Natural Convection Heat Transfer from a Horizontal Circular Cylinder to Its Coaxial Triangular Enclosure

Numerical simulation of phase change heat transfer in cold storage sphere

Effect of Scale on the Modeling of Radiation Heat Transfer in Packed Pebble Beds