Abstract:Crystal monochromators are indispensable optical components for the majority of beamlines at synchrotron radiation facilities. Channel-cut monochromators are sometimes chosen to filter monochromatic X-ray beams by virtue of their ultrahigh angular stability. Nevertheless, high-accuracy polishing on the inner diffracting surfaces remains challenging, thus hampering their performance in preserving the coherence or wavefront of the photon beam. Herein, a magnetically controlled chemical–mechanical polishing (MC-CMP) approach has been successfully developed for fine polishing of the inner surfaces of channel-cut crystals. This MC-CMP process relieves the constraints of narrow working space dictated by small offset requirements and achieves near-perfect polishing on the surface of the crystals. Using this method, a high-quality surface with roughness of 0.614 nm (root mean square, r.m.s.) is obtained in a channel-cut crystal with 7 mm gap designed for beamlines at the High Energy Photon Source, a fourth-generation synchrotron radiation source under construction. On-line X-ray topography and rocking-curve measurements indicate that the stress residual layer on the crystal surface was removed. Firstly, the measured rocking-curve width is in good agreement with the theoretical value. Secondly, the peak reflectivity is very close to theoretical values. Thirdly, topographic images of the optics after polishing were uniform without any speckle or scratches. Only a nearly 2.5 nm-thick SiO2 layer was observed on the perfect crystalline matrix from high-resolution transmission electron microscopy photographs, indicating that the structure of the bulk material is defect- and dislocation-free. Future development of MC-CMP is promising for fabricating wavefront-preserving and ultra-stable channel-cut monochromators, which are crucial to exploit the merits of fourth-generation synchrotron radiation sources or hard X-ray free-electron lasers.

Double-Multilayer Monochromator Using A Modular Design for the Advanced Photon Source

A Sagittally Focusing Double-Multilayer Monochromator for Ultrafast X-ray Imaging Applications.

Developing A Sagittally Focusing Double-Multilayer Monochromator

Design and Preparation of Multilayer Dielectric Beam Splitter for Division-of-Amplitude Photopolarimeter at 1064 nm

Design of a Multilayer-Based Collimated Plane-Grating Monochromator for Tender X-ray Range.

Optimization Of A Variable-Angle Spherical Grating Monochromator

Optical Design of a High-Resolution Spherical Grating Monochromator Beamline

A Near Fourier-Limited Pulse-Preserving Monochromator for Extreme-Ultraviolet Pulses in the Few-Fs Regime

Monochromator development at 4W1B beamline of BSRF

An optimized design method for optical system of a spectroanalyzer

A Magnetically Controlled Chemical–mechanical Polishing (MC-CMP) Approach for Fabricating Channel-Cut Silicon Crystal Optics for the High Energy Photon Source

Preparation and measurement of an x-ray Laue-type monochromator based on a WSi_2/Si multilayer

Design and performance of a multilayered mirror monochromator in the low-energy region of the VUV

Linear Zone Plate Monochromator For Soft-X-Ray Microscopy

Design of Grazing Incident Multi-Included-Angle Plane Grating Monochromator

An Improved Optical Design for a Microscopy Beam Line at Hefei

Crystallographic Data Collection Using a Multilayer Monochromator on an Undulator Beamline at the Shanghai Synchrotron Radiation Facility

HfO2/Al2O3 Multilayer on Parabolic Cylinder Substrate to Monochromatize and Collimate Divergent X-Ray Beam

High-resolution Interference-Monochromator for Hard X-rays.

Monochromator beam line design at 4-120 nm spectral range

Design of a Multichannel Polychromator for KTX Thomson Scattering Diagnostic