Abstract:The accurate classification of coarse coal slime is the premise of efficient separation. Deep Cone Hydraulic Classifier (DCHC) is a new classification equipment for coarse coal slime classification, the content of fine particles (-0.2 mm) in coarse coal slime can be effectively reduced through classification, so as to create suitable feeding granularity for teetered bed separator (TBS) sorting. The DCHC designed includes a column structure area, deep cone structure area, and flush water mode of “bottom water + central water”. Experiments on the impact parameters were carried out, the results showed that: the classification efficiency increased with the decrease of feed concentration and feeding speed, increased first and then decreased with the increase of flush water flow rate. When the feed concentration was 40%, feeding speed is 0.8 m/s and flush water flow rate was 4 m3/h, the classification efficiency reached 69.3%, the content of the −0.2 mm particles in the bottom flow products was only 1.9%. The classification mechanism showed that the column structure area realized fluidization of the flow field and the deep cone structure area supplied the movement trace for the particles. Particularly the −0.074 mm particles movement trace was clear along the cone wall and could be collected as an overflow. A part of the −0.125 mm particles could be collected as an overflow, whereas the remaining part returned to the bottom flow, and increased fine particles content. In addition, the +0.2 mm particles were mostly collected as a bottom flow, and the 0.2–0.3 mm particles content are obviously affected by operating parameters. The results not only provide a new idea for the development of new classification equipment, but also provide a pathway for the efficient classification of coarse coal slime.

Studies of a Water-Only Cyclone with a Three-Stage Cone for Fine Coal Beneficiation

Study on Separation Performance of Tri-Cone Water Medium Cyclone Based on CFD

Study on Separation Mechanism of Falcon Concentrator and Its Application

Enhancement of the classification and recovery process of fine mineral particles via a newly developed volute feed hydrocyclone

Study on the separation performance of honeycomb cone hydrocyclone

Experimental study of the separation performance of a hydrocyclone with a compound curve cone

Study of honeycomb cone combined hydrocyclone for separating blast furnace gas sludge

A Feed-regulated Water-only Cyclone for Improving the Separation Performance of Clean Coal from Coal Slime

Study on the separation performance of a three-product hydrocyclone with overflow reseparation

Experimental study on the separation performance of an enhanced cyclone with shunt device

Modelling and comparison of fine coal beneficiation with water-only cyclone and spiral

Analysis of Gas-Liquid-Solid Three-Phase Flows in Hydrocyclones Through a Coupled Method of VOF and DEM

Research on the particle circulation flow and classification performance of multi-stage cylindrical hydrocyclones

Comparison of Separation Performance of Liquid-Solid Fluidized Bed Separator and Dense Medium Cyclone for Cleaning Coal

Experimental and theoretical study on strengthening mechanism of coarse coal slime classification process with cone wall structure

Study on the modification of the coarse coal-slime separation process in Lv-jiatuo coal preparation plant

Experimental Study on the Three-Dimensional Two-Phase Flow Field in a Hydrocyclone

Enhanced coarse coal slime separation in a gravity–flotation coupled separator with up-flow feeding and dual-concentrate

Numerical analysis of cyclone separators with unique Dipleg structures at different Dipleg-to-dustbin ratios

Experimental Study of A New Hydrocyclone for Multi-Density Particles Separation

Soft Sensing of Overflow Particle Size Distributions in Hydrocyclones Using a Combined Method