Abstract:Cesium-based geopolymer is more refractory than K+ and Na+ based geopolymers after the transformation to ceramic material, whose thermal resistance feature is highly appreciated by some industries, especially in the engineering field where the materials in some cases are exposed to environments with high temperatures. In this study, cesium-activated geopolymer composites (CsGPc), with 5–35 wt% cordierite reinforcements, were prepared and evaluated on the high temperature performance. When 35 wt% cordierite was added, the compressive strength increased by 72% compared to the reference plain CsGP. Residual compressive strength (after heating at 1400 °C) of CsGPc with 35 wt% cordierite increased by 106% compared to the specimen before the thermal exposure. After thermal exposure up to 1400 °C, the geopolymer matrix was transformed into a pollucite-based ceramic composite. Amorphous phases in CsGPc gradually crystallized to form pollucite as the main phase with cordierite as secondary phase. The microstructure of CsGPc and the obtained ceramics showed a clear sintering process and crystallization of pollucite. Shrinkage was reduced and the coefficient of thermal expansion (CTE) varied from 4.50 to 1.89 × 10−6 K−1 with the cordierite inclusion. The performance of obtained ceramic composites was superior compared to the initial CsGPc, which would be excellent for heat resistance applications.

Comparison of Microstructure and Chemical Durability of Ce0.9gd0.1po4 Ceramics Prepared by Hot-Press and Pressureless Sintering

The Structure, Sintering Process, and Chemical Durability of Ce0.5Gd0.5PO4 Ceramics

Preparation and Properties of Ce0.5Nd0.5PO4 Monazite Ceramics by Pressureless Sintering and Spark Plasma Sintering (SPS)

Improved Mechanical Properties of 3YSZ Ceramics Prepared by Pressure-less Sintering Assisted by Cold Sintering under Mild Conditions

Effects of Preparation Conditions on the Structural and Optical Properties of Spark Plasma‐Sintered PLZT (8/65/35) Ceramics

Effect of Mass Fraction of CeO2 on Structure of Zirconolite-based Glass-ceramics

Phase Structure Evolution and Chemical Durability Studies of Gd1−xYbxPO4 Ceramics for Immobilization of Minor Actinides

Preparation and characterization of cerium-gadolinium monazites as ceramics for the conditioning of minor actinides

Effect of Ce-doping on the phase composition and aqueous stability of Gd2Hf2O7 ceramic as nuclear waste forms

Insight into the Effect of Nd2O3 and CeO2 Co-Doped Gd2Zr2O7 Ceramics Without Structural Design: Phase Evolution and Chemical Durability

Study on Agglomeration and Densification Behaviors of Gadolinium-Doped Ceria Ceramics

Order-disorder phase structure, microstructure and aqueous durability of (Gd, Sm)2(Zr, Ce)2O7 ceramics for immobilizing actinides

Effect of CaO additive on the densification of MgO and MgO-YGAG:Ce ceramics

Microstructures and Mechanical Properties of Pressureless Sintered Ca-3(PO4)(2)/Si3N4 Composite Ceramics

Self-propagating high-temperature synthesis of ZrO2 incorporated Gd2Ti2O7 pyrochlore

Flux Synthesis and Chemical Stability of Nd and Ce Co-Doped (gd1−xndx)2(zr1−xcex)2o7 (0 ≤ X ≤ 1) Pyrochlore Ceramics for Nuclear Waste Forms

Chemical Stability of Ce-doped Zircon Ceramics: Influence of Ph, Temperature and Their Coupling Effects

Grain-refining fabrication of nanocrystalline (La0.2Nd0.2Sm0.2Gd0.2Eu0.2)2Zr2O7 high-entropy ceramics by ultra-high pressure sintering

Effect of Nd 2 O 3 dosages and melting temperatures on pyrochlore borosilicate glass-ceramics immobilization

Phase structure evolution and chemical durability studies of Ce-doped zirconolite–pyrochlore synroc for radioactive waste storage

Effect of high temperature heating on the microstructure and performance of cesium-based geopolymer reinforced by cordierite