Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Phase Field Investigation On Sidebranching Dynamics In Transient Growth

Phase Field Simulation of Dendrite Sidebranching During Directional Solidification of Al-Si Alloy

Phase Field Investigation On The Selection Of Initial Sidebranch Spacing In Directional Solidification

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Phase-field Simulation of Dendritic Sidebranching Induced by Thermal Noise

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Application of Phase-Field Method to Numerical Simulation of Solidification

Phase-field simulation of binary alloy during directional solidification

Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process

Phase-Field Simulation Studies of Multiple Grains Coupled with Force Flow Field

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Impact on Solidification Dendrite Growth by Interfacial Atomic Motion Time with Phase-Field Method

Phase-Field Simulation Studies of Dendrite Growth Coupling with Force Flow Field

Phase-field simulation of isothermal solidification of binary alloy based on KKS model

Simulation of Isothermal Solidification of Ternary Alloy with Phase-Field Model

Denedritic Growth in Forced Flow Using the Phase-Field Simulation

Numerical Simulation of Dendritic Side-branching Induced by Thermal Noise Using Phase-field Approach

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Multi-Phase Field Simulation of Grain Growth in Multiple Phase Transformations of A Binary Alloy

Phase-Field Model of Isothermal Solidification with Multiple Grain Growth

Phase-field Modeling of Free Dendritic Growth in Binary Alloy under Forced Flow