Abstract:A specific columnar crystal structure is obtained using the directional solidification technique, which has a substantial effect on the optimization of the axial mechanical properties of the alloy. Additionally, the convection phenomenon in the melt changes the temperature field and concentration field at the front of the solid–liquid interface, affecting the shape of this interface. Thus, the influence on alloy properties cannot be ignored. Although the phase field method has more research on the microdendrite growth morphology, the results of coupling the flow field into the phase field and exploring the microdendrite morphology of directional solidification are still scarce. In this paper, the phase field model of a coupled flow field is used to simulate dendritic growth during directional solidification. The effects of the anisotropy coefficient and interfacial energy on the growth of directionally solidified dendrites and the growth behavior of dendrites under forced convection were studied. For the numerical solution procedure, a uniform grid of the finite difference method was used to discretize the governing equations. A combined solution of the MAC algorithm and a phase field discrete calculation was realized. When addressing the coupling of the microvelocity and pressure fields, the MAC algorithm was used to solve the Navier–Stokes equation and pressure Poisson equation, and the interlocked grid method was applied to handle the complex free interface. The results show that the growth rate of the dendrite tip increases, and the radius of curvature and the solute concentration at the root of the dendrite decrease with an increasing anisotropy coefficient. When the anisotropy coefficient is a maximum of 0.065, the wall of the dendrite tends to develop toward a secondary dendrite because of the influence of the anisotropy coefficient; with increasing interfacial energy, the radius of curvature of the dendrite tip increases. When the interfacial energy is a maximum of 0.6 J·m−2, the solidification shows a flat interface advancing mode; forced convection has a great influence on the growth direction of directional solidification dendrites. The directional solidification of dendrites in the upstream direction is coarse and grows faster with increasing flow rate. Additionally, the dendrite growth morphology observed using an optical microscope agrees well with the experimental results.

Denedritic Growth in Forced Flow Using the Phase-Field Simulation

Phase-Field Simulations of Forced Flow Effect on Dendritic Growth Perpendicular to Flow

Phase-field Modeling of Dendritic Growth under Forced Flow Based on Adaptive Finite Element Method

Phase-Field Simulation Studies of Dendrite Growth Coupling with Force Flow Field

Research the Effect of Forced Flow on Dendritic Growth with Adaptive Finite Element Method

Phase-Field Simulation Studies of Multiple Grains Coupled with Force Flow Field

Convection Effect on Dendritic Growth Using Phase-Field Method

NUMERICAL SIMULATION OF DENDRITIC GROWTH IN UNDERCOOLED MELT USING PHASE-FIELD APPROACH

Phase-field Simulation of Forced Flow Effect on Random Preferred Growth Direction of Multiple Grains

Phase-field lattice-Boltzmann investigation of dendritic evolution under different flow modes

Phase-field Modeling of Free Dendritic Growth in Binary Alloy under Forced Flow

Phase-Field Simulation of Three-Dimensional Dendritic Growth

An Anisotropic Lattice Boltzmann – Phase Field Scheme for Numerical Simulations of Dendritic Growth with Melt Convection

Numerical Simulation of Three-Dimensional Dendritic Growth Using Phase-Field Method

Phase-field Simulation of Pure Material Dendritic Growth Based on Sola Algorithm in Force Laminar Flow

Phase-Field Simulation of Concentration and Temperature Distribution During Dendritic Growth in a Forced Liquid Metal Flow

Phase-Field Simulation of Non-Isothermal Solidification Dendrite Growth of Binary Alloy under the Force Flow

Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process

Phase Field Method Study on the Directional Solidification Microstructure of a Fe-C Alloy under Forced Convection

Effect of Fluid Flow on Solidified Equiaxed Dendrite Morphology Evolution Based on Phase Field - Lattice Boltzmann Method

Quantitative comparison of dendritic growth under forced flow between 2D and 3D phase-field simulation