Abstract:This work presents new experimental viscosity and density data for aromatic and polyaromatic compounds in binary and ternary pyrene, 1-methylnaphthalene, and dodecane mixtures. The lack of experimental viscosity data for these mixtures requires the development of a new database, which is vital for understanding the behavior of mixtures in more complex systems, such as asphaltenes and fuels. The mixtures proposed in this work have been measured over a temperature range of (293.15 to 343.15) K at atmospheric pressure. Several mixture compositions have been studied at these conditions: 1.0, 2.5, 5.0, 7.5, 10.0, 12.5, and 15.0% pyrene mass fraction. The concentration of pyrene correlates with an increase in the viscosity and density values. At the lowest temperature in binary mixtures, the corresponding values reach 4.4217 mPa·s for viscosity and 1.0447 × 103 kg·m-3 for density, respectively. In ternary mixtures, the introduction of dodecane leads to the lowest maximum values of 3.5555 mPa·s for viscosity and 1.0112 × 103 kg·m-3 for density at the same temperature. The experimental data have been employed for the specific modification of viscosity models. These modifications could facilitate the prediction of the viscosity of mixtures that are more complex than those presented in this work. Various viscosity models have been employed, such as Linear, Ratcliff and Khan, modified UNIFAC-Visco, and Krieger-Dougherty. The settings in the models used reliably reproduce the experiment reliably. However, the Ratcliff model agrees excellently with the experiment, having a low standard deviation (2.0%) compared to other models. Furthermore, a model based on the equation of state of Guo is proposed to predict the viscosity values by modifying the specific parameters and adjusting them to the mixtures proposed in this work. The results from this study are compared to previous work, where pyrene, toluene, and heptane mixtures were analyzed. In this case, we find that the decrease of aggregation grade in the present systems is predicted by the model fixed in this work.

Densities, Viscosities, and Refractive Indices of Binary Mixtures of 1,2,3,4-Tetrahydronaphthalene with Some N-Alkanes at T = (293.15 to 313.15) K

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Density, refractive index, viscosity, and surface tension of binary mixtures of exo -tetrahydrodicyclopentadiene with some n -alkanes from (293.15 to 313.15) K

Solubilities of 2,6-Dimethylnaphthalene in Six Pure Solvents and Two Binary Solvent Systems

Densities And Viscosities For The Ternary System Of 1,2,3,4-Tetrahydronaphthalene Plus Isopropylcyclohexane Plus Cyclopropanemethanol And Corresponding Binaries At T = (293.15 To 343.15) K

Densities and Viscosities for the Ternary System of 1,2,3,4-Tetrahydronaphthalene + Isopropylcyclohexane + Cyclopropanemethanol and Corresponding Binaries at T = (293.15 to 343.15) K

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Densities and Viscosities of the Ternary System Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + 1,2,3,4-Tetrahydronaphthalene (3) and the Corresponding Binary Systems at T = (293.15–333.15) K

Densities and viscosities of binary mixtures of exo - tetrahydrodicyclopentadiene with N -undecane or N -tetradecane at T = (293.15 to 313.15) K

Volumetric Properties of Binary Systems Between Tetralin and Alkylbenzenes

Mixing Properties of Tris(2-ethylhexyl) Phosphate with Alkanes at Different Temperatures and Data Treatment Using Several Correlation Equations Based on Eyring's Absolute Reaction Theory

Viscosities and Densities of Binary and Ternary Mixtures of Aliphatic and Polyaromatic Hydrocarbons: Pyrene +1-Methylnaphthalene + Dodecane at T = (293.15 to 343.15) K. Experiment and Modeling

Densities and Viscosities of Ternary System N-Dodecane (1) + Bicyclohexyl (2) + N-Butanol (3) and Corresponding Binaries at T = (293.15 to 333.15) K

Densities And Viscosities For The Ternary System Of Exo-Tetrahydrodicyclopentadiene (1) + Methylcyclohexane (2) + Cyclopropanemethanol (3) And Its Binaries At T=293.15 To 333.15 K

Density, Viscosity, and Freezing Point for Four Binary Systems of N-Dodecane or Methylcyclohexane Mixed with 1-Heptanol or Cyclohexylmethanol

Thermodynamic Study of Binary Mixtures of Tricyclo[5.2.1.02.6]decane with N-methylpiperazine or Triethylamine at T=298.15–323.15K

Density, Viscosity, Refractive Index, and Freezing Point for Binary Mixtures of 1,1′-Bicyclohexyl with Alkylcyclohexane

Densities and Viscosities for the Ternary System of Cyclopropanemethanol (1) + n-Dodecane (2) + Butylcyclohexane (3) and Corresponding Binaries at T = 293.15–343.15 K

Excess Molar Volume along with Viscosity, Flash Point, and Refractive Index for Binary Mixtures of Cis-Decalin or Trans-Decalin with C9 to C11 N-Alkanes

Excess Molar Volume along with Viscosity, Refractive Index and Relative Permittivity for Binary Mixtures of Exo -Tetrahydrodicyclopentadiene with Four Octane Isomers