Abstract:Dye-sensitized solar cell (DSSC) has been widely investigated due to its low cost, simple fabrication process, and excellent photoelectric conversion efficiency. Generally, the DSSC is composed of photoanode, electrolyte and counter electrode. At present, platinum (Pt) film delivers the highest photoelectric conversion efficiency in the available counter electrode materials. However, Pt film is very expensive and prepared by relatively complicated and high-cost magnetron sputtering, which seriously hinders the large-scale applications in DSSC. Therefore, it is of highly academic and engineering significance to develop novel counter electrode materials with low cost and high photoelectric conversion efficiency to replace expensive Pt counter electrode. Previous research shows that carbon-based nanomaterials such as graphene and carbon nanotubes ard promising to be used as highly efficient counter electrode materials. However, the high-cost and complicated fabrication process restrict their practical applications in DSSC. To address such issues, here in this work, we present and fabricate a highly efficient and low-cost three-dimensional porous carbon composite, which is constructed by the relatively dense and conductive graphite film as bottom layer (PC layer), and the porous carbon nanoparticle film as top layer (CC layer). Our fabricated DSSC consists of commercial TiO2 photoanode (m 4 mm×4 mm), and PC, CC, CC/PC composite, or Pt counter electrode with a size of m 8 mm×8 mm. The results show that under illumination (100 mW/cm2) provided by a solar simulator, the short circuit current densities (open circuit voltages) of DSSCs with PC, CC, CC/PC, and Pt counter electrodes are 11.45 mA/cm2 (0.72 V), 11.88 mA/cm2 (0.73 V), 12.00 mA/cm2 (0.75 V), and 13.46 mA/cm2 (0.74 V), respectively. The filling factors of DSSCs with PC, CC, and CC/PC are 56.09%, 59.80%, 65.28%, and 62.69%, respectively; the photoelectric conversion efficiencies of DSSCs with PC, CC, and CC/PC are 4.61%, 5.20%, 5.90%, and 6.26%, respectively. It is noted that compared with CC layer or PC layer counter electrode, the CC/PC counter electrode delivers better photovoltaic performance. Particularly, the filling factor of DSSC with CC/PC (65.28%) is even 4.10% higher than that of DSSC with commercial Pt (62.69%), and the photoelectric conversion efficiency of the CC/PC-based DSSC is as large as 5.90%, which reaches 94.2% of the Pt-based DSSC (6.26%). The excellent performance of DSSC with CC/PC counter electrode is attributed to the unique three-dimensional porous structure, which can not only facilitate the transfer of electrons and ions, but also provide abundant catalytic sites; these synergistic effects greatly enhance the photovoltaic conversion performance of CC/PC-based DSSC.

Quasi-solid-state Dye-sensitized Solar Cells Employing Fibers Stacked Paper Carbons As Efficient Counter Electrodes

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Fabrication and Photovoltaic Performance of Counter Electrode of 3D Porous Carbon Composite

Highly efficient and stable spray assisted nanostructured Cu2S/Carbon paper counter electrode for quantum dots sensitized solar cells

Multifunctional conjugated molecules combined with electrospun CuCoP/carbon nanofibers as a modifier of Pt counter electrode for dye-sensitized solar cells

Unique Dye-Sensitized Solar Cell Using Carbon Nanotube Composite Papers with Gel Electrolyte

Preparation and Optimization of Flexible Quantum Dot Paste Based Photoanodes and Carbon Based Counter Electrodes

Novel design for flexible quasi-solid-state dye-sensitized solar cells based on heat-resistant glass paper

Ordered Multimodal Porous Carbon As Highly Efficient Counter Electrodes In Dye-Sensitized And Quantum-Dot Solar Cells

All-carbon Electrode-Based Fiber-Shaped Dye-Sensitized Solar Cells

Ultrasonic Remove of Particle Aggregation in Carbon Based Counter Electrodes for Dye-Sensitized Solar Cells

Quasi-solid-state, Coaxial, Fiber-Shaped Dye-Sensitized Solar Cells

Enhanced Performance Of Quasi-Solid-State Dye-Sensitized Solar Cells By Tuning The Building Blocks In D-(Pi)-A '-Pi-A Featured Organic Dyes

A Low Cost Mesoporous Carbon/sno2/tio2 Nanocomposite Counter Electrode for Dye-Sensitized Solar Cells

High-Efficiency Dye-Sensitized Solar Cells Based on Kesterite Cu 2 ZnSnSe 4 Inlaid on a Flexible Carbon Fabric Composite Counter Electrode

SnS-quantum Dot Solar Cells Using Novel TiC Counter Electrode and Organic Redox Couples.

Flexible counter electrodes with a composite carbon/metal nanowire/polymer structure for use in dye-sensitized solar cells

Carbon Counter-Electrode-Based Quantum-Dot-Sensitized Solar Cells with Certified Efficiency Exceeding 11.

Design highly effective B or N doped mesoporous carbon fibers catalysts for I 3 - /I - redox couple regeneration in carbon-based dye-sensitized solar cells

Highly Efficient Dye-Sensitized Solar Cells Based on Carbon Nanofibers Counter Electrodes