Abstract:Sluggish kinetics of lithium/sulfur (Li/S) conversion chemistry and the ion channels formation in the cathode is still a bottleneck for developing future Li/S batteries with high-rate, long-cycling and high-energy. Here, a rational cathode structure design of an oxygen (O) and nitrogen (N) tailoring carbon fiber aerogel (OCNF) as a host material integrated with platinum (Pt) electrocatalysis interface is employed to regulate Li/S conversion chemistry and ion channel. The Pt nanoparticles were uniformly sprayed onto the S surface to construct the electrocatalysis interface (Pt/S/OCNF) for generating ion channels to promote the effective penetration of electrolyte into the cathode. This Pt/S/OCNF gives the cathode a high sulfur utilization of 77.5%, an excellent rate capacity of 813.2 mAh/g (2 C), and an outstanding long-cycling performance with a capacitance retention of 82.6% and a decay of 0.086% per cycle after 200 cycles at 0.5 C. Density functional theory (DFT) calculations reveal that the Pt electrocatalysis interface makes the cathode a high density of state (DOS) at Fermi level to facilitate the electrical conductivity, charge transfer kinetics and electrocatalysis to accelerate the lithium polysulfides (LiPSs) electrochemical conversion. Furthermore, the unique chemisorption structure and adsorption ability of Li2Sn (n = 1, 2, 4, 6, 8) and S8 on OCNF are attributed to the bridging effects of interfacial Pt and the bonding of N-Li. The Pt electrocatalysis interface combined with the unique 3D hierarchical porous structure and abundant functional active sites at OCNF guarantee strong adsorption confinement, fast Li/S electrocatalytic conversion and unblocked ion channels for electrolyte permeation in cathode.

A Graphene-like Oxygenated Carbon Nitride Material for Improved Cycle-Life Lithium/Sulfur Batteries.

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

High-rate, Ultralong Cycle-Life Lithium/sulfur Batteries Enabled by Nitrogen-Doped Graphene.

Rutile Titanium Dioxide and Graphene-Like OCN Tailoring Free-Standing Carbon Fiber Aerogel As Polysulfide Anchoring Materials for Lithium–sulfur Batteries

Oxygen and nitrogen tailoring carbon fiber aerogel with platinum electrocatalysis interfaced lithium/sulfur (Li/S) batteries

Construct a porous carbon structure 3D-NOPC doped with N and O as the sulfur main body for durable lithium-sulfur batteries

Synthesis of porous N deficient graphitic carbon nitride and utilization in lithium-sulfur battery

A 3D Conductive Network of Porous Carbon Nanoparticles Interconnected with Carbon Nanotubes As the Sulfur Host for Long Cycle Life Lithium-Sulfur Batteries.

Engineering the Conductive Network of Metal Oxide‐Based Sulfur Cathode toward Efficient and Longevous Lithium–Sulfur Batteries

Carbon-nanotube/sulfur Cathode with In-Situ Assembled Si3N4/graphene Interlayer for High-Rate and Long Cycling-Life Lithium-Sulfur Batteries

Oxygen vacancies in open-hollow microcapsule enable accelerated kinetics for stable Li-S battery

Biomass Derived Ni(OH)2@porous Carbon/sulfur Composites Synthesized by a Novel Sulfur Impregnation Strategy Based on Supercritical CO2 Technology for Advanced Li-S Batteries

Ultraﬁne Nanosulfur Particles Sandwiched in Little Oxygen-functionalized Graphene Layers as Cathodes for High Rate and Long-life Lithium-Sulfur Batteries.

Optimized Sulfur-Loading in Nitrogen-Doped Porous Carbon for High-Capacity Cathode of Lithium–sulfur Batteries

Horizontally Aligned Lamellar Porous Graphene/nickel Composite for High Volumetric Capacity Lithium-Sulfur Batteries

Constructing 1D/2D Interwoven Carbonous Matrix to Enable High-Efficiency Sulfur Immobilization in Li-S Battery

Graphdiyne-like Porous Organic Framework As a Solid-Phase Sulfur Conversion Cathodic Host for Stable Li-S Batteries

Construction of all-carbon micro/nanoscale interconnected sulfur host for high-rate and ultra-stable lithium-sulfur batteries: Role of oxygen-containing functional groups

Ordered micro-mesoporous carbon nanopheres embedded with Ni/Ni 3 ZnC 0.7 heterostructure as an efficient cathode host for high-performance lithium-sulfur batteries

Tuning Nitrogen in Graphitic Carbon Nitride Enabling Enhanced Performance for Polysulfide Confinement in Li–S Batteries