Abstract:The ability to undercool and solidification mechanism of liquid quinary Ni40Zr28.5Ti16.5Al10Cu5 alloy are investigated by electromagnetic levitation (EML) and drop tube (DT) technique. Under the EML condition, the maximum undercooling of levitated alloy can reach up to 290 K (0.21TL). Under the DT condition, the alloy achieves higher undercooling than EML, and solidifies finally into metallic glass. At lower undercooling, the solidification structure of the alloy is composed of primary Ni3Ti phase, secondary Ni10Zr7 phase and eutectic (Ni10Zr7+Ni21Zr8) phase. With the rise of undercooling, the solidification structure displays the following evolution events: phase morphology refinement, primary phase inhibition, phase number reduction, and amorphous phase formation. By using the high-speed cinematography technique, three nucleation modes are distinctly observed on the levitated alloy melt surface at the beginning of solidification, that is, single-point nucleation, multi-point nucleation and annular nucleation. The levitation state corresponding to single-point mode nucleation is relatively stable, and the alloy undercooling is also relatively low. The annular nucleation only occursin the case with high rotation speed, and the undercooling is greater than 208 K. The discrepancy between nucleation modes is due to the He gas flow for forced cooling. The theoretical calculations indicate that the alloy droplets achieve high undercoolingand large cooling rate under the DT condition. The experimental results show that when the droplet diameter decreases to 498 μm, the amorphous phase begins to appear in the alloy particles. It is noteworthy that the amorphous phase is preferentially formed inside the droplet, but not on the outer surface. The morphology of solidification structure reveals that different regions of the droplet have various local undercoolings, which result in the distribution characteristics of amorphous phase. The volume fraction of amorphous phase increases linearly with the decrease of particle diameter. When the droplet diameter decreases to 275 μm, the alloy droplets are completely frozen into glassy particles. The average eutecticspacing values are also measured at different alloy undercoolings. Compared with the classical binary eutectic growth model, the experimental eutectic growth law exhibits a large deviation in index. This indicates that the eutectic growth in multicomponent alloys displays more complex kinetic characteristics.

Real-time Observation on Coarsening of Second-Phase Droplets in Al–Bi Immiscible Alloy Using Synchrotron Radiation X-ray Imaging Technology

Analysis of second phase coarsening in Al-Bi hypermonotectic alloy during solidification

A Computational and Experimental Study of Ultrasonicated Phase Separation Process for Liquid Al–Bi Immiscible Alloy

Multiple Ultrasounds Assisted Phase Separation and Monotectic Solidification of Liquid Ternary Al81.5Cu14.7Bi3.8 Immiscible Alloy

Observation of Bi Coarsening and Dissolution Behaviors in Melting Al–Bi Immiscible Alloy

Real-Time Observation on Evolution of Droplets Morphology Affected by Electric Current Pulse in Al-Bi Immiscible Alloy

Microscopic Phase-Field Simulation of Coarsening Behavior of Precipitates in Ni75alxv25-X Alloy

Microscopic Phase-Field Simulation of the Coarsening Behavior of Coherent Precipitates in Ni-Al Alloys

In Situsynchrotron Study of Liquid Phase Separation Process in Al-10 Wt.% Bi Immiscible Alloys by Radiography and Small Angle X-ray Scattering

Coarsening Kinetics of Intermetallic Precipitates in Ni75AlxV25−x Alloys

Rapid Solidification Processing of Ag-5%Bi Alloy under Microgravity Condition Inside Drop Tube

Rapid Solidification Mechanism of Liquid Quinary Ni-Zr-Ti-Al- Cu Alloy Investigated by High-Speed Cinematography

Dynamic Behaviors of Minor Droplets and the Role of Bubbles in Phase-Separating AlBi Immiscible Alloy

Dynamic behaviors of minor droplets and the role of bubbles in phase-separating Al Bi immiscible alloy

Real Time Observation of Interface Evolution in Al/Cu Bimetal by Synchrotron Radiation Imaging

Simulation of Nucleation and Coalescence of Second Phase Droplets During Earth-Based Solidification Process of Immiscible Alloys

Dynamic Scaling Behaviour of Late-Stage Phase Separation in Ni75AlxV25−xalloys

Initial Precipitation and Coarsening of the Γ Phase in Inverse Ni–Al Alloys

Experimental Investigations and Phase-Field Simulations of Triple-Phase-separation Kinetics Within Liquid Ternary Co-Cu-Pb Immiscible Alloys.

In Situ Investigation of Minor-Phase Globule Collision and the Structure in a Droplet-Shaped Immiscible Alloy

Influences of Solution Cooling Rate on Microstructural Evolution of a Multiphase Ni3Al-based Intermetallic Alloy