Abstract:Copper and copper alloys are widely used in electrical, rail transit and many other fields with their excellent electric, thermal conductivity and plasticity. However, pure copper has low strength and softening temperature, which is difficult to meet the requirements of application components, such as high-speed rail contact line, putting its conductivity and tensile strength forward higher requirements. The ideal contact wire material performance indicators are tensile strength greater than 600 MPa and conductivity not less than 80% IACS, and in the field of higher requirements such as lead frame, the softening temperature is needed to be greater than 500 °C, however, copper-based materials often do not have a high softening temperature. The 1vol.% multi-layer graphene/copper composite bars were fabricated by ball milling, vacuum sintering and extrusion of different temperature. The mechanical properties, conductivity and microstructure of composite bars were investigated. The results indicate that the yield strength, tensile strength and conductivity are increased with decreased temperature. The maximum elongation tends to increase from 900 to 600 °C. Fine grain strengthening and deformation twins were observed in extrusion process and dislocation strengthening was found in cold extrusion process. The results show that the composite extruded at room temperature has the highest yield strength (221.4 MPa), tensile strength (345.1 MPa), conductivity (111.5% IACS), the lowest maximum elongation (12.3%) and softening temperature (266 °C), and the composite extruded at 600 °C has yield strength (94.6 MPa), tensile strength (223.4 MPa), high conductivity (106.7% IACS), the highest maximum elongation (42.3%) and softening temperature (758 °C).

Effect of Ball Milling on the Defeat of Few-Layer Graphene and Properties of Copper Matrix Composites

Long-term Ball Milling and Hot Pressing of In-Situ Nanoscale Tungsten Carbides Reinforced Copper Composite and Its Characterization

Microstructure and Properties of In-Situ TiC Reinforced Copper Nanocomposites Fabricated Via Long-Term Ball Milling and Hot Pressing

Effects of Ball Milling Times on Microstructure and Properties of Cu matrix Composites Reinforced with Graphene Oxide Nanosheets

Microstructure and mechanical properties of graphene-reinforced copper matrix composites prepared by in-situ CVD, ball-milling, and spark plasma sintering

Effect of ball-milling and graphene contents on the mechanical properties and fracture mechanisms of graphene nanosheets reinforced copper matrix composites

Microstructure and Properties of a Graphene Reinforced Cu–Cr–Mg Composite

Mechanical and Electrical Properties of Graphene Oxide Reinforced Copper–Tungsten Composites Produced via Ball Milling of Metal Flakes

Preparation of graphene/copper nanocomposites by ball milling followed by pressureless vacuum sintering

Production of few-layered graphene reinforced copper by powder metallurgy

Enhanced mechanical and electrical properties of novel graphene reinforced copper matrix composites

Effect of Ball Milling on Graphene Reinforced Al6061 Composite Fabricated by Semi-Solid Sintering

High strength and conductivity copper matrix composites reinforced by in-situ graphene through severe plastic deformation processes

High strength and high electrical conductivity in copper reinforced with intra-/inter-granular graphene in-situ exfoliated from graphite

Superior mechanical properties and wear resistance of copper/graphite metallic composites fabricated with fibrous copper powder

Effect of Temperature on the Mechanical Properties, Conductivity, and Microstructure of Multi-layer Graphene/Copper Composites Fabricated by Extrusion

Effect of Copper-Plated Graphite Content on the Microstructure and Properties of Copper-Graphite Composites Prepared by Spark Plasma Sintering

In-situ generated graphene from wheat flour for enhancing mechanical and electrical properties of copper matrix composites

Microstructure and properties of bulk copper matrix composites strengthened with various kinds of graphene nanoplatelets

Effect of Powder Preparation Techniques on Microstructure, Mechanical Properties, and Wear Behaviors of Graphene-Reinforced Copper Matrix Composites

Microstructure, electrical conductivity and hardness of multilayer graphene/Copper nanocomposites synthesized by flake powder metallurgy