Abstract:A novel hydrogenated nitrile rubber (HNBR) composite filled with organically modified Al2O3 nanoparticle was fabricated. The effects of the nano‐Al2O3 with different particle sizes on the curing, mechanical, and tribological properties of the HNBR composites were studied. The results indicate the curing, mechanical, and tribological properties of the HNBR composites were improved for the addition of nano‐Al2O3, and the smaller nano‐Al2O3 size was, the more obvious the effect was. The HNBR composite filled with 10 nm nano‐Al2O3 had the better mechanical properties and anti‐wear performance due to that the 10 nm nano‐Al2O3 could form denser cross‐linked network. A novel hydrogenated nitrile butadiene rubber (HNBR) composite filled with organically modified Al2O3 nanoparticle was fabricated. The effects of nanoparticle Al2O3 (nano‐Al2O3) with different particle sizes on the curing, mechanical, and tribological properties of the HNBR composites were studied. Nano‐Al2O3 with different particle sizes (i.e. 10, 50, 100, and 200 nm) was filled into the HNBR in this work. Attenuated total reflection Fourier transform infrared (ATR‐FTIR) spectroscopy was used to investigate the degree of grafting between modified nano‐Al2O3 and rubber matrix. Universal material testing machine was used to study the mechanical properties of the HNBR composites. The tribological properties of the HNBR composites were tested by a ballon‐on‐disk tribometer. The wear morphology of the HNBR composite surface was examined by scanning electron microscopy (SEM). The test results reveal that the nano‐Al2O3 as filler of HNBR composite promoted the vulcanization process, improved tensile and compressive strength, and increased hysteresis energy density and the damping coefficient. And the mechanical properties of the HNBR composite improved gradually with the decrease of nano‐Al2O3 particle size. The friction and wear test results show that the addition of nano‐Al2O3 greatly reduced the dry friction coefficient and specific wear rate of HNBR composites, and the friction coefficient and wear rate decreased gradually with the decrease of nano‐Al2O3 size. The HNBR composite filled with 10 nm nano‐Al2O3 had the better mechanical properties and anti‐wear performance due to that the 10 nm nano‐Al2O3 could form denser cross‐linked network.

Preparation of nano‐reinforced thermal conductive natural rubber composites

Preparation of nanoalumina/EPDM composites with good performance in thermal conductivity and mechanical properties

Properties of Carbon Nano-tube/Nano-alumina/Natural Rubber Composites

Preparation of nano-zinc oxide/EPDM composites with both good thermal conductivity and mechanical properties

Effect of Micro-Si3n4-Nano-Al2o3 Co-Filled Particles on Thermal Conductivity, Dielectric and Mechanical Properties of Silicone Rubber Composites

Thermal Conductivity of Natural Rubber Nanocomposites with Hybrid Fillers

Improved Mechanical Properties of Natural Rubber Composites Reinforced by Novel SiO 2 @hcnfs Nanofillers at a Low Filler Loading

Enhancing the Thermal Conductivity of CNT/AlN/Silicone Rubber Composites by Using CNTs Directly Grown on AlN to Achieve a Reduced Filler Filling Ratio

Preparation and investigation of properties of deproteinized natural rubber nanocomposites incorporating functionalized nano‐alumina by in situ emulsion polymerization

Reinforcement of Natural Rubber with Carbon Black/Nanoclay Hybrid Filler

Mechanical Properties and Microstructure Characterization of Natural Rubber Reinforced by Helical Carbon Nanofibers

Preparation and mechanical properties of natural rubber composites reinforced by modified molybdenum disulfide

Natural rubber nanocomposites: effect of carbon black/multi-walled carbon nanotubes hybrid fillers on the mechanical properties and thermal conductivity

Improved Thermal Conductivity and Electromechanical Properties of Natural Rubber by Constructing Al2O3-PDA-Ag Hybrid Nanoparticles

Improving the Thermal and Mechanical Properties of an Alumina-Filled Silicone Rubber Composite by Incorporating Carbon Nanotubes

Carbon nanotubes/carbon black synergistic reinforced natural rubber composites

Synergistic Effect of Aluminum Nitride and Carbon Nanotube-Reinforced Silicon Rubber Nanocomposites

Natural Rubber Composites with Enhanced Thermal Conductivity Fabricated Via Modification of Boron Nitride by Covalent and Non-Covalent Interactions

Comparative Study on the Natural Rubber Nanocomposites Reinforced with Carbon Black Nanoparticles and Graphite Oxide Nanosheets

Curing, mechanical, and tribological properties of hydrogenated nitrile butadiene rubber reinforced with Al2O3 nanoparticles

Preparation of Natural Rubber/Modified Fumed Silica Nano-Composites