Abstract:The size dependence of ductile to brittle transition of Zr-based metallic glasses was systematically investigated by small punch test. It was found that the metallic glasses with thickness ranging from 50 to 700 μm displayed an obvious transition from ductility to brittleness. Compared with thick samples, thin samples exhibit higher strength and better plasticity, which is attributed to the size-dependent transformation from soft state to hard state dominated by the deformation factor (<math>α=τ/σ</math>). Specifically, two significant transitions in deformation behavior at sample thickness of 200 and 500 μm are attributed to two critical deformation factors of <math>αc1</math> and <math>αc2</math>, which are responsible for the initiation of circumferential and radial shear bands, respectively. Specifically, only several micro-cracks can be observed on sample surface with <math>α≤αc2</math>. While <math>αc1≥α≥αc2</math>, multiple radial shear bands are activated and uniformly distributed on the sample surface. Further, when <math>α≥αc1</math>, multiple circumferential shear bands primarily initiate under high shear stress and large number of radial and circumferential shear bands can be observed on sample surface. The initiation and interaction of multiple radial and circumferential shear bands significantly enhance the ductility of the samples with <math>α≥αc1</math>.

The Influence of Glass Transition Temperature on the Critical Size for Deformation Mode Transition in Metallic Glassy Films

Effect of temperature and strain rate on deformation behavior in metallic glassy films

The Size-Dependent Non-Localized Deformation in A Metallic Alloy

Atomic-scale Heterogeneity in Large-Plasticity Cu-doped Metallic Glasses

Size effects in Cu50Zr50 metallic glass films revealed by molecular dynamics simulations

Dependence of Shear Yield Strain and Shear Transformation Zone on the Glass Transition Temperature in Thin Film Metallic Glasses

On the Critical Thickness for Non-Localized to Localized Plastic Flow Transition in Metallic Glasses: A Molecular Dynamics Study

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

The Effect of Size on the Elastic Strain Limit in Ni60Nb40 Glassy Films

Relationship of Deformation Mode with Strain-Dependent Shear Transformation Zone Size in Cu-Zr Metallic Glasses Using Molecular Dynamics Simulations

Creep Deformation in Metallic Glasses: A Global Approach with Strain as an Indicator within Transition State Theory

Bending Behavior of Electrodeposited Glassy Pd–P and Pd–Ni–P Thin Films

Surface Compressive and Softening Effect on Deformation Mode Transition in Ni-Nb Metallic Glassy Thin Films: A Molecular Dynamics Study

Size dependence of ductile to brittle transition of Zr-based metallic glasses under multiaxial loading

Stress-state-dependent deformation behavior in Ni-Nb metallic glassy film

The glass transition diagram in model metallic glasses

Influence of Size-Dependent Free Volume Variation and Distribution on the Thermoplastic Flow Behavior of Zr-based Bulk Metallic Glass

Effects of substrate temperature on structure, thermal stability and mechanical property of a Zr-based metallic glass thin film

Stress-dependent Shear Transformation Zone in NiNb Thin Film Metallic Glass and Its Correlation with Deformation Mode Transition

Size Effects on Tensile and Compressive Strengths in Metallic Glass Nanowires

Size Effect in Pd77.5cu6si16.5 Metallic Glass Micro-Wires: More Scattered Strength with Decreasing Diameter