Abstract:Peritectic reaction is frequently encountered in many technologically important materials (e.g., steels, brass, bronze, intermetallic compounds, magnetic materials and YBa2Cu3Ox superconductors). Many interesting microstructures have been found during directional solidification of peritectic alloys, which have drawn much attention since last decade. In this work, in order to investigate the growth behavior of Al3Y phase as a peritectic phase, directioanal solidification experiments at different pulling rates have been performed on Al-53%Y (mass fraction) peritectic alloy. The results show that the primary phase and the peritectic phase both grow continuously, the microstructure, which is parallel to the solid-liquid interface has been found and explained at a low pulling rate (V= 1 mu m/s). With the growth distance increase, the precipitating solid phase from the liquid at the quenching solid-liquid interface transforms from primary Al2Y phase to peritectic Al3Y phase. The interface consists of coarse Al3Y phase without Al2Y phase. At relatively high pulling rates, the morphologies of primary Al2Y phase transit from continuous growth to cellular phase, and further to dendrites with the pulling rate increase. The results also show that the primary phase is enclosed with the serrate peritectic phase, and Al3Y phase precipitates from the liquid in needle shape at the same time. With the growth distance further increase, Al3Y phase become thicker and more numerous. In addition, the Al3Y phase precipitated from liquid transit from needle shape to short rod and lump shape, which distributes around the peritectic structure.

Microstructure Evolution of Al 2 O 3 /Y 3 Al 5 O 12 Eutectic Crystal During Directional Solidification

Insights into the Stable Preferred Growth Direction of Rods in the Colony of Al2O3/ZrO2 (Y2O3) Eutectics

Crystallography and Interfacial Structure in a Directionally Solidified Al2O3/Y3Al5O12/ZrO2 Eutectic Crystal

Microstructure Evolution and Growth Behaviors of Faceted Phase in Directionally Solidified Al-Y Alloys Ii. Microstructure Evolution of Directionally Solidified Al-53%Y Peritectic Alloy

Preparation and Microstructure of Large-Sized Directionally Solidified Al2O3/Y3Al5O12 Eutectics with the Seeding Technique

Microstructure Evolution and Growth Behaviors of Faceted Phase in Directionally Solidified Al-Yalloys I. Microstructure Evolution of Directionally Solidified Al-15%Y Hypereutectic Alloy

Microstructure of Directionally Solidified Al2O3/EAG Eutectic Ceramics Prepared with High-Temperature Gradient

Microstructure Evolution in Directionally Solidified Ti–(50, 52)at%al Alloys

Microstructure and Mechanical Properties of Al2O3/YAG Eutectic Ceramic Grown by Horizontal Directional Solidification Method

Microstructure Evolution of Directionally Solidified Al-12%Ni Hypereutectic Alloy

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

Orientation and Microstructure Evolution of Al-Al 2 Cu Regular Eutectic Lamellar Bifurcating in an Abruptly Changing Velocity under Directional Solidification.

Isotropy in Large-Size Al2o3/Y3al5o12 Eutectic Ceramic Grown by Horizontal Directional Solidification Method

Microstructure Evolution and Competitive Growth During Grain Growth of Directionally Solidified Column Crystal DZ4125 Superalloy

Microstructure evolution during directional solidification of off-eutectic Al-Cu-Mg alloys

The microstructure of a directionalloy solidified NiAl-Cr(Mo)-Hf alloy

Microstructure Transition of Γ-Tial Alloys with Abrupt Cross-Sections in Yttria Ceramic Moulds During Directional Solidification by Electromagnetic Cold Crucible

The Directional Solidification, Microstructural Characterization and Deformation Behavior of Β-Solidifying TiAl Alloy

Microstructure Evolution of Directionally Solidified Ti–46Al–0.5W–0.5Si Alloy

Microstructure Evolution of Ti-Al Peritectic System During the Initiated Stage of Directional Solidification

Mechanical properties of directionally solidified Al 2 O 3 /Y 3 Al 5 O 12 eutectic ceramic prepared by optical floating zone technique