Abstract:It is well known that the shape memory effect of NiTi alloy is closely related to the micro-structural characteristics. Neutron diffraction method can used to explore the changes of the phase transformation, lattice strain and twining reorientation of bulk NiTi alloy during deformation caused by the applied stress. In this paper, combining the four types of deformation characteristics in the macro stress-strain curves of dual phase NiTi alloy and using in-situ neutron diffraction measurement, the micromechanical interactions and phase transformation are determined. The volume fraction of the initial austenite before deformation is about 22%. The contrast transformation, which is corresponding to the lattice strain rapid decreasing of (110)B2 and increasing of (002)B19', reveals that the stress-induced transformation from austenite to martensite phase appears with the volume fraction of austenite decreasing rapidly and 011 II type twinning increases at the low strain hardening stage. At the same time, the initial martensite grains change their orientation to a favorable direction and the new {201} type martensite twinnings induced with the increase of applied stress cannot recover after unloading. At the high strain hardening stage, the twinning deformation is considered to be the main mechanism from the observing of the changes in the full width at half maximum (FWHM). Meanwhile, the slipping caused by dislocation is the main deformation mechanism corresponding to the obvious increas of the FWHM at the statured stage of the strain hardening.

Influence of internal stress coupling on the deformation behavior of NiTi–Nb nanowire composites

Influence of Inter-tube Connections on the Stress-Strain Behavior of Nanotube-Polymer Composites: Molecular Dynamics

In-situ high energy X-ray diffraction study of deformation behavior in Nb nanoparticle-martensitic NiTi composite wire

Surface Stress Effects On The Yield Strength In Nanotwinned Polycrystal Face-Centered-Cubic Metallic Nanowires

Bending-induced Deformation Twinning in Body-Centered Cubic Tungsten Nanowires

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Study on phase transformation, internal stress and texture evolution of cold drawn Nb nanowire-NiTi composite wires upon annealing

In-situ synchrotron X-ray diffraction investigation on deformation behavior of Nb/NiTi composite during pre-straining process

Deformation of Copper Nanowire under Coupled Tension–Torsion Loading

Plastic deformation in bi-metal multilayer nanowires

Effects of residual stress on the isothermal tensile behavior of nanocrystalline superelastic NiTi shape memory alloy

In situ synchrotron X-ray diffraction analysis of deformation behavior of a Nb/NiTi composite for biomedical applications

Strain glass transition in Nb nanowire toughened NiTiHf shape memory alloy composite wires

In-situ EBSD study of the multiple deformation modes of a TiNb/Nb/NiTi multilayer composite

Bent Strain Values Affect the Plastic Deformation Behaviours of Twinned Ni NWs

Atomistic simulations of the deformation behavior of an Nb nanowire embedded in a NiTi shape memory alloy

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

Consecutive Crystallographic Reorientations and Superplasticity in Body-Centered Cubic Niobium Nanowires

Deformation mechanism of MWCNT/Ni composites under shear deformation: A molecular dynamics study

Study of deformation and shape recovery of NiTi nanowires under torsion

Effect of Reinforcement Shape on the Stress–strain Behavior of Aluminum Reinforced with SiC Nanowire