Abstract:Boron (B), normally present in ground water and sea water, is a vital micronutrient for plants, but is also toxic in excessive amounts. Under typical conditions, aqueous boron is present as boric acid (H3BO3), which is uncharged, making B particularly challenging to remove by mechanisms commonly applicable to removal of trace constituents. Adsorption of B onto aluminum hydroxide solids (Al(OH)3(s)) generated using aluminum-based electrocoagulation (EC) is a promising strategy for B removal. Infrared spectroscopy analysis indicated complexation of B(OH)3 with aluminum hydroxide solids via surface hydroxyl groups, while X-ray and infrared spectroscopy results indicated that the structure of the Al(OH)3(s) was influenced both by EC operating conditions and by water quality. A linear adsorption model predicted B removal well when initial concentrations were lower than 50 mg/L, but fit the experimental data poorly at higher initial B concentrations. The Langmuir adsorption model provided a good fit for a broader range of initial B concentrations (5-1000 mg/L). Factors affecting B adsorption during the EC process, including current intensity, Al dissolution rate, boron concentration, pH, and total dissolved solid (TDS), were investigated. Increasing current intensity initially led to a higher Al dissolution rate, and therefore higher B adsorption, but there was a limit, as further increases in current intensity caused rapid formation of Al(OH)3(s) having a large particle size and a low capacity to complex B. Boron removal decreased as its concentration increased. The best removal of B occurred at pH 8, corresponding to a slightly positive zeta potential for aluminum hydroxide and a small but significant fraction of negatively charged B species. Higher TDS concentrations facilitated the use of higher current intensities, i.e., the limit on the effective Al dissolution rate increased with increasing TDS. Two real water samples (river water and oilfield produced water) spiked with B were treated using EC, resulting in up to 50% B removal from river water (C0 = 10 mg/L, current = 0.2 A) in 2 h, and 80% B removal from produced water (C0 = 50 mg/L, current = 1.0 A) in 2 h.

Boron removal using chelating resins with pyrocatechol functional groups

Progress in Extractants for Boron Recovery from Salt-Lake Brine

Preparation of Amino Propanediol Functionalized Boron-Chelating Resins and Application in Adsorption of Boric Acid

A new multi-hydroxyl methacrylate based adsorbent for boron removal from aqueous solutions

Materials for Boron Adsorption

Cellulose-derived polyols as high-capacity adsorbents for rapid boron and organic pollutants removal from water

Sustainable boron removal from aqueous solutions using pomegranate peel adsorbents: A comprehensive study on isotherms, kinetics, and thermodynamics

Effective Removal of Boron from Aqueous Solutions by Inorganic Adsorbents: A Review

Boron removal by a composite sorbent: Polyethylenimine/tannic acid derivative immobilized in alginate hydrogel beads

Preparation and application of porous functional polymers for boron removal in seawater desalination by a mild and free-organic solvents process

Efficient Removal of Boron Acid by N-methyl-d-glucamine Functionalized Silica–polyallylamine Composites and Its Adsorption Mechanism

Incorporation of N-Methyl-d-glucamine Functionalized Oligomer into MIL-101(Cr) for Highly Efficient Removal of Boric Acid from Water.

Boron continuous recovery from brines by the multicolumn simulated moving bed process with boron chelating resin

Performances of novel chelating ion exchange resins for boron and arsenic removal from saline geothermal water using adsorption-membrane filtration hybrid process

Surface-Activated Chelating Resins Containing N-Methyl-D-Glucamine Functional Groups for Desalination of Geothermal Water Aimed for Removal of Boron and Arsenic

Separation of Boron and Arsenic from Geothermal Water with Novel Gel-Type Chelating Ion Exchange Resins: Batch and Column Sorption-Elution Studies

Boron Removal with Modified Polyamide RO Modules by Cross‐linked Glutaric Dialdehyde Grafting

Application of resins to the adsorption of highly concentrated fluorine-containing aromatic hydrocarbon in wastewater and the reuse of their resources

A novel recyclable absorption material with boronate affinity

Boron Removal from Aqueous Solution by Direct Contact Membrane Distillation

Boron removal by electrocoagulation: Removal mechanism, adsorption models and factors influencing removal