Abstract:Purpose For moderate pressure and high pressure gear pumps, the temperature failure problem of bearings is now of considerable concern because of their heavy loads. However, the compact structure and the efficiency consideration make it extremely difficult to improve the bearing cooling. A self-circulating oil bearing system is developed for gear pumps with self-lubricating bearings to solve this problem. The oil is aspirated in from the low pressure chamber of the gear pump and discharged to the same chamber by using the pressure difference in the journal bearing, thus achieving the self-circulation. Design/methodology/approach An experiment test rig has been built for the feasibility study. The oil flow rate under different speeds has been recorded. Furthermore, the temperatures of the bearings with or without the oil circulation have been compared. Additionally, the oil flow in the test rig has been simulated using computational fluid dynamics codes. Findings The experimental and numerical results agree well. The experimental results indicate that the oil flow rate increases approximately linearly with the speed and the bearing temperature can be lowered successfully. The calculation results indicate that the bearing load capacity is nearly the same. Both the experimental and numerical studies establish that the self-circulating oil bearing system works successfully. Originality value As far as the authors know, it is the first time to find that the self-circulation can be built using the pressure difference in the bearing oil film, and this principle can be applied in the cooling and lubrication of the gear pumps to solve the temperature failure problem.

THD Analysis of Rolling Piston and Journal Bearings in Rotary Compressors

Numerical analyses of THD lubrication and dynamics of rolling piston and bearings in a rotary compressor

Numerical Analyses of Hydrodynamic Lubrication and Dynamics of the Rolling Piston and Crankshaft in a Rotary Compressor

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

Investigation On Heat Exchange And Lubrication Of Rolling Piston Type Rotary Compressor In Air Conditioner

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Experimental and numerical analysis of heat transfer mechanisms for two-phase oil-refrigerant flow process in the cylinder of rotary compressor

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Dynamic Analysis of Turbocharger Rotor Bearing with an Integrated Three Dimensional Thermohydrodynamic Model

Mixed elastohydrodynamic analysis of a coupled journal-thrust bearing system in a rotary compressor under high ambient pressure

A Thermohydrodynamic Analysis of the Self-Lubricating Bearings Applied in Gear Pumps Using Computational Fluid Dynamics Method

Thermohydrodynamic Study on Journal Bearings Using Finite Element Analysis

Dynamic analyses for the rotor-journal bearing system of a variable speed rotary compressor

Prediction on Flow and Thermal Characteristics of Ultrathin Lubricant Film of Hydrodynamic Journal Bearing

TEHL Analysis of High-Speed and Heavy-Load Roller Bearing with Quasi-Dynamic Characteristics

Fault Analysis of Journal Bearing Considering the Turbulent and Thermo-Hydrodynamic Effects

A Theoretical Study on Three-dimensional Pressure Distributions and Temperature Field of Water-lubricated Hydrostatic Journal Bearings

Three-Dimensional Thermohydrodynamic Analysis of Circular Journal Bearing

Theoretical Model Development and Mixed Lubrication Analyses of Rolling Piston Type Rotary Compressors: A Review

Three-dimensional TEHD Analysis of Bi-directional Thrust Bearing in Pump-turbine

3D Two-Way Coupled Tehd Analysis on the Lubricating Characteristics of Thrust Bearings in Pump-Turbine Units by Combining Cfd and Fea