Abstract:Tunable diode laser absorption spectroscopy of CO was studied in the controlled laboratory environments of a heated cell and a combustion exhaust rig. Two absorption lines, R(10) and R(11) in the first overtone band of CO near 2.3 mu m, were selected from a HITRAN simulation to minimize interference from water vapor at a representative combustion exhaust temperature (similar to 1200 K). The linestrengths and collision broadening coefficients for these lines were measured in a heated static cell. This database was then used in a comparative study of direct absorption and wavelength-modulation absorption. CO concentration measurements using scanned-wavelength direct absorption (DA) and wavelength modulation with the second-harmonic signal normalized by the first-harmonic signal (WMS-2f/1f) all agreed with those measured by a conventional gas sampling analyzer over the range from < 10 ppm to 2.3%. As expected, water vapor was found to be the dominant source of background interference for CO detection in combustion flows at high temperatures. Water absorption was measured to a high spectral resolution within the wavelength region 4295-4301 cm(-1) at 1100 K, and shown to produce < 10 ppm level interference for CO detection in combustion exhausts at temperatures up to 1200 K. We found that the WMS-2f/1f strategy avoids the need for WMS calibration measurements but requires characterization of the wavelength and injection-current intensity modulation of the specific diode laser. We conclude that WMS-2f/1f using the selected R(10) or R(11) transitions in the CO overtone band holds good promise for sensitive in situ detection of ppm-level CO in combustion flows, with high resistance to interference absorption from H2O.

Ppb-Level Formaldehyde Detection Using A Cw Room-Temperature Interband Cascade Laser and A Miniature Dense Pattern Multipass Gas Cell

Dual-feedback Mid-Infrared Cavity-Enhanced Absorption Spectroscopy for H2CO Detection Using a Radio-Frequency Electrically-Modulated Interband Cascade Laser.

Ppb-level Mid-Infrared Ethane Detection Based on Three Measurement Schemes Using a 3.34-Μm Continuous-Wave Interband Cascade Laser

High-Pressure Measurements of Temperature and CO2 Concentration Using Tunable Diode Lasers at 2 μm

Improved Spherical Mirror Multipass-Cell-based Interband Cascade Laser Spectrometer for Detecting Ambient Formaldehyde at Parts Per Trillion by Volume Levels

A Mid-Infrared Quantum Cascade Laser Ultra-Sensitive Trace Formaldehyde Detection System Based on Improved Dual-Incidence Multipass Gas Cell

Sensitive Carbon Monoxide Detection Based on Light Induced Thermoelastic Spectroscopy with a Hollow Waveguide and 2.3 Μm Diode Laser

A Sensitive Carbon Dioxide Sensor Based on Photoacoustic Spectroscopy with a Fixed Wavelength Quantum Cascade Laser

Ppbv-Level Ethane Detection Using Quartz-Enhanced Photoacoustic Spectroscopy with a Continuous-Wave, Room Temperature Interband Cascade Laser.

An Early Fire Gas Sensor Based on 2.33 Μm DFB Laser

Sensitive carbon monoxide detection based on laser absorption spectroscopy with hollow‐core antiresonant fiber

Portable TDLAS Sensor for Online Monitoring of CO2 and H2O Using a Miniaturized Multi-Pass Cell

Sensitive Detection of Ambient Formaldehyde by Incoherent Broadband Cavity Enhanced Absorption Spectroscopy.

Highly sensitive portable laser absorption spectroscopy formaldehyde sensor using compact spherical mirror multi-pass cell

A Dual-Laser Sensor Based on Off-Axis Integrated Cavity Output Spectroscopy and Time-Division Multiplexing Method

Real-time measurements of atmospheric CO using a continuous-wave room temperature quantum cascade laser based spectrometer

Bilayer Structure Based Surface Acoustic Wave Sensor for Formaldehyde Detection

Development a Low-Cost Carbon Monoxide Sensor Using Homemade CW-DFB QCL and Board-Level Electronics

Absorption Sensor for CO in Combustion Gases Using 2.3 Μm Tunable Diode Lasers

Ppb-level Methane Detection Sensitivity Based on a Homemade Raman Fiber Amplifier and Differential Photoacoustic Technology

A Sensitive Carbon Monoxide Sensor Based On Photoacoustic Spectroscopy With A 2.3 Mu M Mid-Infrared High-Power Laser And Enhanced Gas Absorption