Abstract:Slot-type casing treatment generally has a great potential of enhancing the operating range for tip-critical compressor rotors, however, with remarkable efficiency drop. Part I of this two-part paper was committed to develop a slot configuration with desired stall margin improvement and minimized efficiency loss. Steady simulation was carried out in a 1.5 transonic axial compressor stage at part design rotating speed. At this rotating speed this compressor stage operated at a subsonic condition and showed a rather narrow operating range, which needed to be improved badly. Flow fields analysis at peak efficiency and near stall point showed that the development of tip leakage vortex and resulting blockage near casing resulted in numerical stall. Three kinds of skewed slots with same rotor exposure and casing porosity were designed according to the tip flow field and some empirical strategies. Among three configurations, arc-curved skewed slot showed minimum peak efficiency drop with considerable stall margin improvement. Then rotor exposure and casing porosity were varied based on the original arc-curved skewed slot, with a special interest in detecting their impact on the compressor stability and overall efficiency. Result showed that smaller rotor exposure and casing porosity leaded to less efficiency drop. But meanwhile, effectiveness of improving compressor stability was weakened. The relation between efficiency drop and stall margin improvement fell on a smooth continuous curve throughout all slots configurations, indicating that the detrimental effect of casing treatment on compressor was inevitable. Flow analysis was carried out for cases of smooth casing and three arc-curved configurations at smooth casing near stall condition. The strength of suction/injection, tip leakage flow behavior and removal of blockage near casing were detailed examined. Larger rotor tip exposure and slots number contributed to stronger injection flow. The loss generated within the mixing process of injection flow with main flow and leakage flow is the largest source of entropy increase. Further loss mechanisms were interpreted at eight axial cuts, which were taken through the blade row and slots to show the increase in entropy near tip region. Entropy distributions manifested that loss generations with smooth casing were primarily ascribed to low-momentum tip leakage flow/vortex and suction surface separation at leading edge. CU0 slot, the arc-curved slots with 50% rotor tip exposure, was capable of suppressing the suction surface separation loss. Meanwhile, accelerated tip leakage flow brought about additional loss near casing and pressure surface. Upstream high entropy flow would be absorbed into the rear portion of slots repeatedly, resulting in further loss.

Effect of circumferential grooves casing treatment on tip leakage flow and loss in a transonic mixed-flow compressor

Investigation of Tip Leakage Flow and Stage Matching with Casing Treatment in A Transonic Mixed-Flow Compressor

Numerical Investigation of Interaction Between Casing Treatment and Tip Leakage Flow in a Transonic Compressor Rotor

Mechanism of the Interaction Between Casing Treatment and Tip Leakage Flow in a Subsonic Axial Compressor

Numerical Investigation of Circumferential Groove Casing Treatment in a Highly-Loaded Low-Reaction Transonic Compressor Rotor

Numerical Analysis of the Circumferential Grooves Casing Treatment in a Counter-Rotating Axial Flow Compressor

Numerical Simulation of Transonic Compressor Rotor Performance Affected by the Casing Circumferential Groove Suction

Effect of Circumferential Single Casing Groove Location on the Flow Stability under Tip-Clearance Effect in a Transonic Axial Flow Compressor Rotor

Numerical Analysis of the Effects of Circumferential Groove Casing Suction in a Counter-Rotating Axial FLow Compressor

Mechanism on the Interactions of Rotor Tip Flow with Slot-Type Casing Treatment in A Transonic Compressor Stage

Effect of Circumferential Groove Casing on the Response to Distortion of an Axial Flow Compressor Rotor

Exploring Flow Mechanism of Effect of Circumferential Grooved Casing Treatment on Performance of Subsonic Axial Flow Compressor

Analysis of Impact of a Novel Combined Casing Treatment on Flow Characteristics and Performance of a Transonic Compressor

Numerical and Experimental Investigations of the Flow in a Compressor with Circumferential Grooves

Numerical Investigation on Slot Casing Treatment in a Transonic Axial Compressor Stage: Part 1 — Casing Treatment Design

Numerical analysis of two circumferential groove casing treatments about a centrifugal compressor

Investigation of the Casing Groove Location Effect for a Large Tip Clearance in a Counter-Rotating Axial Flow Compressor

The Impact of Circumferential Casing Grooves on Rotating Instability in a Transonic Axial Compressor

The impact of casing groove location on the flow instability in a counter-rotating axial flow compressor

Pitchwise Casing Treatment for Effects of Grooves on Dynamics of Vortices and Loss of Blade Tip Region of a Compressor Cascade

Effects of the circumferential casing groove configuration on aerothermal performance of a transonic turbine stage