Abstract:The problem of ammonium bisulfate (ABS) deposition blocking and corroding air preheaters and economizers in boilers became severe, as the selective catalyst reduction (SCR) system was widely used in the coal-fired boilers to meet the stringent nitrogen oxide (NOx) discharge standard. In this study, an online digital image technique was applied to investigate the growth of the deposition of fly ash and ABS blend in a drop tube furnace (DTF). The deposition was measured on a temperature controlled deposition probe. The results of the image technique showed that the surface temperature of the deposition probe had a negative effect on stable thicknesses of the blend depositions and the stable thicknesses for cases 1 (553 K), 2 (513 K), and 3 (473 K) are 4.78, 5.26, and 7.64 mm, respectively. Meanwhile, the relative variation of the heat flux Q(R) for Cases 1, 2, and 3 are 17.8%, 33.8%, and 40.2%. The deposition in the lower deposition surface temperature has a greater effect on the heat transfer efficiency. In order to understand the deposition formation of fly ash and ABS blend, the X-ray diffraction (XRD), X-ray fluorescence (XRF), and the scanning electron microscopy (SEM) analysis were undertaken of the blend deposition. The results indicated that the content of ABS in the bottom part deposition increased as the probe surface temperature decreases, and this would result in more agglomerates in the deposition according to the observations of the SEM and the growth behavior of the deposition was influenced. Meanwhile, the results show that the deposition characteristics of ABS and fly ash blend is strongly influenced by the distribution and the condensation behavior of ABS. This work makes a contribution to a deeper understanding of deposition characteristics of ammonium bisulfate and fly ash blend, which is important for boilers to control the blend deposition in air preheaters and economizers.

Investigation of the Influence of the Furnace Temperature on Slagging Deposit Characteristics Using A Digital Image Technique

Investigation of Slagging Characteristics in a 300 Kw Test Furnace: Effect of Deposition Surface Temperature

Experimental Study of the Influence of Temperatures under SCR Conditions Using an On-Line Digital Image Technique

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

An Experimental Investigation into the Characteristics and Deposition Mechanism of High-Viscosity Coal Ash

Research on the Slagging Characteristics of Easy to Slagging Coal in a Pilot Scale Furnace

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Investigation of the Deposition Characteristics of Ammonium Bisulfate and Fly Ash Blend Using an On-Line Digital Image Technique: Effect of Deposition Surface Temperature

Simulation of Ash Deposition in Different Furnace Temperature with a 2D Dynamic Mesh Model

Research on the Slagging Characteristics of Blended Coals in A Pilot-Scale Furnace

Investigation on Ash Fusion and Slagging Properties of Coal under Reducing Atmosphere

Experimental Study on Ash Fusion Characteristics and Slagging Potential Using Simulated Biomass Ashes

Investigation on Ash Deposition Characteristics During Zhundong Coal Combustion

MODELLING STUDY ON THE EFFECT OF ASH FUSION CHARACTERISTICS ON THE BIOMASS SLAGGING BEHAVIOR

In Situ Diagnostics on the Dynamic Processes of Ash Deposit Formation, Shedding, and Heat Transfer in a Self-Sustained Down-Fired Furnace

Crystallization of Coal Ash Slags at High Temperatures and Effects on the Viscosity

Influence of Fe2O3 Content on Crystallization Behavior of Slag at Cooling Process

Characteristic of Ash Deposit Growth and Temperature Field by Image Processing

The Effect of Blast Furnace Slag Added Fly Ash Tuning Composition

Analysis on Deposition Mechanism of Ash with High Ash Fusion Temperatures on the Heat-insulation Layer in Boiler