Abstract:The world's highest-field dc magnets have, for more than fifty years, consisted of a combination of resistive and superconducting coils that we refer to as a "hybrid". These magnets use superconducting technology for the outer coils, where the magnetic field is moderate, and resistive-magnet technology for the inner coils, where the field is highest. In such a configuration, higher fields have been attained than was possible with purely superconducting magnet technology, and lower lifecycle costs are attained than with a purely resistive magnet. The peak field available has been 45 T for over 20 years in Tallahassee, Florida, USA. There is presently a "revolution" underway in hybrid magnet development. A second 45 T hybrid was completed in 2022 in Hefei, China that might be upgraded to 48 T in a few years. The high field lab in Grenoble, France is also testing a hybrid magnet intended to reach 43.5 T but which also might be upgraded to 46 T in a few years. In addition, the lab in Nijmegen, The Netherlands is presently assembling a hybrid magnet intended to operate at 46 T. Papers have been presented and published with conceptual designs of hybrid magnets with fields up to 60 T. Given the developments underway, this is an appropriate time to review the history of such systems, with a particular focus on the larger, more expensive part of the magnets: the superconducting outsert coils. The demands placed on the superconducting coils of these magnet systems are unique due to their coupling with resistive coils that are operated at very high stress and wear out regularly, resulting in large field transients and fault forces. The evolution of the technology used for the superconducting coils of these hybrid systems is presented, evolving from ventilated windings to cable-in-conduit to cryogen-free.

Analysis of the Magnetic Forces Generated in the Hybrid Magnet Being Built in China

Design and Analysis of a Superconducting Induction Magnetic Levitation Device for Hydraulic Turbo-Generator

Study Of The Load Reduction For Hydro-Generator Bearing By Hybrid Magnetic Levitation

Engineering Design of the Superconducting Outsert for 40 T Hybrid Magnet

Mechanical Behavior Analysis of Model Coil for the 40-T Hybrid Magnet Superconducting Outsert

Final Design of the 40 T Hybrid Magnet Superconducting Outsert

A 40 T Hybrid Magnet under Construction in China

Power Supply System for the Superconducting Outsert of the CHMFL Hybrid Magnet

Thermal-Hydraulic Performance Analysis of the Superconducting Magnet During the Trip of the Resistive Magnet in Chmfl Hybrid Magnet

AC Loss Analysis of a Model Coil for a 40 T Hybrid Magnet

Design and Analysis of the Hybrid Magnet in EMS Maglev Vehicles

Quench Simulation of the Hybrid Magnet Superconducting Outsert Being Built in China

Design of a 42 T Resistive Magnet at the CHMFL

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Design and Test of Vacuum System for 40 T Hybrid Magnet Superconducting Outsert of China

Superconducting magnet technology for the outer coils of resistive-superconducting hybrid magnets

The design of cable-in-conduit conductors for the superconducting outsert coils of a 40 T hybrid magnet

Design of a 15 T Hybrid Superconducting Magnet

Thermal Performance Simulation of a Model Coil for a 40-T Hybrid Magnet

Design and Test of Power Supply System for 45 T Hybrid Magnet Superconducting Outsert at the CHMFL

Analysis of the Experimental Results for the Nb3Sn Model Coil Being Built in China