Abstract:Nano FePO4 center dot xH(2)O powders were synthesized by controlled crystallization method, using Fe(II) compound as the iron source. The nano FePO3 center dot xH(2)O powders were pretreated at 500 degrees C for 4 h in air to obtain nano FePO4 precursor. Then the olivine nano LiFePO4/C composites were obtained through carbonthermal reduction process at different temperatures. The structure, morphology, physicochemical properties and electrochemical properties of the nano FePO4 center dot xH(2)O powder, FePO4 precursor and LiFePO4/C composites synthesized at different temperatures were characterized in detail by thermogravimetric/differential scanning calorimeter (TG/DSC), X-ray diffraction (XRD), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET) surface area measurement and electrochemical measurement. The result show that the nano LiFePO4/C composite calcined at 700 degrees C for 10 h has fine particle sizes of about 40-100 nm. The BET test shows that the as-prepared nano LiFePO4/C composite has great specific surface area of 79.8 m(2)/g. The nano LiFePO4/C composite cathode material can deliver an initial discharge capacity of 156.5, 134.9, 105.8, 90.3 and 80.9 mAh/g in the voltage range of 2.5-4.2 V, at rate of 0.1C, 1C, 5C, 10C and 15C respectively, which exhibits good rate performance. The nano LiFePO4/C composite also demonstrates excellent cyclic performance.

Synthesis and Characterization of Li0.97K0.03FePO4/Graphene Composites by Carbonthermal Reduction Method

Synthesis and Characterization of Li<sub>0.97</sub>K<sub>0.03</sub>FePO<sub>4</sub>/Graphene Composites by Carbonthermal Reduction Method

Synthesis and electrochemical performance of LiFePO 4/graphene composites by solid-state reaction

Nanostructure Optimization of LiFePO4/carbon Aerogel Composites for Performance Enhancement

Preparation and Electrochemical Properties of (fe2.5ti0.5)1.04o4–graphene Nanocomposite

Synthesis and electrochemical properties of LiFePO4/C composite cathode materials

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Optimization of Carbon Coatings on LiFePO4: Carbonization Temperature and Carbon Content

Synthesis and Properties of LiFePO4/LiNi0.8Co0.15Al0.05O2 Composite Cathode Material Modificated by Graphene for Lithium Ion Battery

Improvement of the Electrochemical Performance of Carbon-Coated Lifepo4 Modified with Reduced Graphene Oxide

Electrochemical Performance of LiFe1−xVxPO4/carbon Composites Prepared by Solid-State Reaction

Li 0.99 Ti 0.01 FePO 4 /C composite as cathode material for lithium ion battery

Preparation and Electrochemical Performance of LiFePO_4/C Using Fe_2O_3 As Raw Material

Facile synthesize LiFePO4 nanocomposites with excellent electrochemical properties as cathodes for lithium ion batteries

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance

Improving the Rate and Low-Temperature Performance of LiFePO 4 by Tailoring the Form of Carbon Coating from Amorphous to Graphene-Like

Defect effects on the physical and electrochemical properties of nanoscale LiFe0.92PO4 and LiFe0.92PO4/C/graphene composites.

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Enhanced Rate Performance of Two-Phase Carbon Coated LiFePO4/(C+G) Using Natural Graphite As Carbon Source

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries