Abstract:It is important to characterize the composition of aerosol particles in air, which causes adverse health effects and millions of deaths each year. Aerosol, or particulate matter (PM), is difficult to characterize because of its wide range of particle sizes; constituents (various organic and inorganic compounds); concentration; morphology; state (liquid or solid); and time-dependent modification. Infrared (IR) spectroscopy is a non-destructive method, which provides useful chemical information about the constituents. Current methods for collecting samples use filters that are made of materials which interferes with the IR spectra and thus lowers detection capabilities. Hence, collection on an IR-transparent substrate is desirable. In order to make a good quantitative measurement of the composition of the aerosol using IR-spectroscopy, a collector design should achieve some objectives. Low size-dependence, low chemical interference, and high collection efficiency are required to collect an aerosol sample that is identical to the aerosol in air. Furthermore, high spatial uniformity in deposition pattern is required to reduce optical artefacts or spectrometer dependence, and high collection mass flux is required to reduce the collection time needed for making a confident claim. Electrostatic precipitation (ESP) is a versatile method of aerosol collection and does not suffer from high pressure drop (which can modify the aerosol chemical composition, for example in filtration), or from bounce-off effects (which preferentially samples the size range and liquids, for example in impaction). ESP devices for particle deposition are present in either a translationally symmetric design (linear system) or a radially symmetric design (radial system). Most ESP designs in the public domain have been designed for different purposes and face limitations for fulfilling objectives stated above. Hence, a new device is necessary to meet performance objectives. Our design is based on an analytical, dimensionless (scalable) mathematical model that embodies the physics of particle migration trajectories due to fluid dynamics and electrostatics that lead to particle capture in a two-stage ESP device. This model allowed us to evaluate the tradeoffs among objectives to arrive at a design optimized across multiple objectives, and across multiple length scales (due to its dimensionless form). We validated this model against numerical simulations using COMSOL Multiphysics software, which is considered to be accurate but can only be run for a limited number of configurations (with respect to geometry and operating parameters) due to its high computational cost. Using the validated analytical model, we investigate the relationship among device geometry, methods of particle introduction, operational parameters, and deposited particle positions (which determines collection efficiency, uniformity, and size dependence), to arrive at a range of designs that meet design criteria. We further report the fabrication of a suitable embodiment using 3D-printing while incorporating ease of operation and handling. Measurement capabilities and limits of the device using different laboratory-generated aerosol are reported.

Comparison of aerosol spectrometers : Accounting for evaporation and sampling losses

Overview of measurements and current instrumentation for 1–10 nm aerosol particle number size distributions

Analytical challenges when sampling and characterising exhaled aerosol

Sizing response of the Ultra-High Sensitivity Aerosol Spectrometer (UHSAS) and Laser Aerosol Spectrometer (LAS) to changes in submicron aerosol composition and refractive index

Estimation of aerosol droplet sizes by using a modified DC-III portable droplet measurement system under laboratory and field conditions

An experimental method for efficiently evaluating the size-resolved sampling efficiency of liquid-absorption aerosol samplers

Analysis of Measurement Techniques to Determine Dry Deposition Velocities of Aerosol Particles with Diameters Less Than 100 Nm

Method and apparatus for quantitative measurement of aerosol composition using controlled collection of airborne particles

Quantifying Exhaled Particles in Healthy Humans During Various Respiratory Activities Under Realistic Conditions

A Method to Generate Experimental Aerosol with Similar Particle Size Distribution to Atmospheric Aerosol

Mobility Particle Size Spectrometers: Harmonization of Technical Standards and Data Structure to Facilitate High Quality Long-Term Observations of Atmospheric Particle Number Size Distributions

Comparison of the performance of aerosol sampling devices for measuring infectious SARS-CoV-2 aerosols

Size Distribution and Optical Properties of Ambient Aerosols During Autumn in Orleans, France

Evaluation of aerosol chemical speciation monitor response to different mixtures of organic and inorganic aerosols

Evaluation of the spatial distribution of aerosols produced by various respiratory activities

Optical characterization of native aerosols from e-cigarettes in localized volumes

Comprehensive performance evaluation of six bioaerosol samplers based on an aerosol wind tunnel

LOAC: a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles – Part 1: Principle of measurements and instrument evaluation

Comparison of Measurement Results of Several Online Carbonaceous Aerosol Monitoring Techniques

Droplet Size Distributions in Turbulent Clouds: Experimental Evaluation of Theoretical Distributions

Combining Instrument Inversions for Sub-10 Nm Aerosol Number Size-Distribution Measurements