Abstract:Publication date: 8 April 2024 Source: Journal of Nano Research Vol. 82 Author(s): Mayetu E. Segale, Touhami Mokrani, Rudzani A. Sigwadi Nafion®/silica nanocomposite membranes were prepared by impregnation method from Nafion® 117 and sol-gel pre-synthesized n-octadecyl-trimethoxy silane (C18TMS) coated silica nanoparticles. The scanning electron microscope (SEM) of pristine silica particles displayed monodispersed nanospheres with diameters ranging from 150-350 nm; while Brunauer-Emmett-Teller (BET) analysis presented 760 m2/g BET surface area, a micropore-mesopore bimodal distribution of micropore systems with respective pore volume at 14.6 Å and 17.0 Å (2.01 x 10-3 cm3/g.Å), as well as the prolific mesopores centered at 29.5 Å (5.64 x 10-2 cm3/g.Å). Characterization of Nafion® 117 based membranes on SEM, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and x-ray diffraction (XRD), and tensile stress exhibited varying surface morphology with silica loadings, structural interaction between membrane support and the ion exchanger, thermal stabilities (up to 330 °C), crystalline nature, and reasonable mechanical stability of nanocomposite membranes. The maximum water uptake (44.8 %) and proton conductivity of (1.14 x10-2 S/cm) were obtained on low Nafion®/SiO2 (5%) loaded membrane. While both composite membranes displayed the improved reduction in methanol permeability, 2.43x10-07 cm2/s at 80 °C was obtained with high Nafion®/SiO2 (10%) loading. Improved water uptake and proton conductivity substantiate the high ion exchange capacity (IEC) of 1.81 meq.g-1 when compared to IEC of 0.93 meq.g-1 [pristine Nafion®] and 1.46 meq.g-1 [Nafion®/SiO2 (10%)]. The increase in IEC value may be due to the high acid functionalization of additional sulfonic acid groups surrounded by hydrophilic segments of nanosilica, which improves the properties of the membrane. The high proton conductivity coupled with great water retention capabilities indicated that the Nafion®/SiO2 nanocomposite membranes could be utilized as proton exchange membranes for medium temperature methanol fuel cells. Keywords: Fuel cells; nanocomposite membrane; SiO2 nanofillers; methanol permeability; ion exchange capacity

Nanocomposite Membranes Based on Perfluorosulfonic Acid/ceramic for Proton Exchange Membrane Fuel Cells

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Surfactant-assisted polymer electrolyte nanocomposite membranes for fuel cells

Composite Proton Conductive Membranes for Elevated Temperature and Reduced Relative Humidity PEMFC

Proton Conducting, Composite Sulfonated Polymer Membrane for Medium Temperature and Low Relative Humidity Fuel Cells

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

A nanocomposite proton exchange membrane based on PVDF, poly(2-acrylamido-2-methyl propylene sulfonic acid), and nano-Al2O3 for direct methanol fuel cells

Synthesis and Characterization of Enhanced Proton-Conducting Nafion® 117- Silica Composite Membranes for Fuel Cell Applications

Nafion/Surface Modified Ceria Hybrid Membranes for Fuel Cell Application

Nanocomposite Membranes Based on Quaternized Polysulfone and Functionalized Montmorillonite for Anion-Exchange Membranes

Poly(fluorenyl Aryl Piperidinium) Membranes and Ionomers for Anion Exchange Membrane Fuel Cells

Engineering Mesoporosity Promoting High-Performance Polymer Electrolyte Fuel Cells

Nafion/IL Intermediate Temperature Proton Exchange Membranes Improved by Mesoporous Hollow Silica Spheres

Novel-SiO2-Doped Proton Exchange Membrane for Self-Humidifying Fuel Cell

Nafion-carbon nanocomposite membranes prepared using hydrothermal carbonization for proton-exchange-membrane fuel cells

Sulfonated poly(fluorene ether ketone) (SPFEK)/α-zirconium phosphate (ZrP) nanocomposite membranes for fuel cell applications

Low-swelling Proton-Conducting Multi-Layer Composite Membranes Containing Polyarylene Ether Nitrile and Sulfonated Carbon Nanotubes for Fuel Cells

Novel Nafion composite membranes with mesoporous silica nanospheres as inorganic fillers

Sulfonated Poly(Fluorene Ether Ketone) (Spfek)/Alpha-Zirconium Phosphate (Zrp) Nanocomposite Membranes For Fuel Cell Applications

Silica and Sulfonated Silica Functionalized Nexar Nanocomposite Membranes for Application in Proton Exchange Membrane Fuel Cell