Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

Study of N–Ag–Zn/TiO 2 , N–Ag–Zr/TiO 2 with N719 and P3OT Co-Sensitization Effect on the Performance of Dye-Sensitized Solar Cell

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Photocurrent Enhancement by Employing 2,6-Bis[1-(2,4,6-trimethyl-phenylimino)ethyl]Pyridine as a Co-Sensitizer with Ruthenium in Dye Sensitized Solar Cell

Performances of dye-sensitized solar cell based on ZnO photoanode sensitized with cadmium complexes Cd(phen)2(NO3)(NO2)

N, S-doped TiO2 Anode Effect on Performance of Dye-Sensitized Solar Cells

An Enhanced Degree of Charge Transfer in Dye-Sensitized Solar Cells with a ZnO-TiO2/N3/Ag Structure As Revealed by Surface-Enhanced Raman Scattering.

Synthesis of Zn-doped TiO2 nano-particles using metal Ti and Zn as raw materials and application in quantum dot sensitized solar cells

Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With PbTiO 3 –ZnFe 2 O 4 /TiO 2 Nanofibers

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

The charge-transfer property and the performance of dye-sensitized solar cells of nitrogen doped zinc oxide

Research on Photovoltaic Measurement and Electrochemical Impedance Spectroscopy Analysis of Dye-Sensitized Solar Cells With Modification of Photoanodes by TiO2 Nanofibers Composited With Zn2SnO4-SnO2 Under Various Illuminances

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

Preparation and Enhanced Properties of Dye-Sensitized Solar Cells by Surface Plasmon Resonance of Ag Nanoparticles in Nanocomposite Photoanode

A Zno/Tio2 Composite Nanorods Photoanode with Improved Performance for Dye-Sensitized Solar Cells

Zn-doped Nanocrystalline TiO2 Films for CdS Quantum Dot Sensitized Solar Cells.

Improving The Efficiency Of Zno-Based Dye-Sensitized Solar Cells By Pr And N Co-Doping

The Preparation and Improved Properties of Dye-Sensitized Solar Cells by Surface Plasmon Resonace of Ag Nanoparticles

Improved performance of dye-sensitized solar cells: An TiO 2-nano-SiO 2 hybrid photoanode with post-treatment of TiCl 4 aqueous solution

ZnO/Ti<sub>3</sub>C<sub>2</sub>T<sub> x </sub> composite photoanodes for efficient dye-sensitized solar cells

Significant Influence of Nano-Sio2 on the Performance of Dye-Sensitized Solar Cells Based on P25