Solidification/stabilization of heavy metals and its efficiency in lead–zinc tailings using different chemical agents

Zhongtao Luo,Changbo Tang,Yuhua Hao,Zhenhua Wang,Guangjun Yang,Yu Wang,Yuandong Mu
DOI: https://doi.org/10.1080/09593330.2020.1845817
IF: 3.475
2020-11-21
Environmental Technology
Abstract:<span>Lead–zinc tailings are generated during the mining process which is considered as hazardous solid waste due to its high heavy metal content and leachability in the natural state. At present, the most effective technology for disposing heavy metals in solid wastes is the solidification/stabilization (S/S) technique. In terms of S/S technology, chemical stabilization is one of the most potential and practical method. This paper aims to investigate the S/S property of four typical chemical agents (Na<sub>2</sub>S, NaH<sub>2</sub>PO<sub>4</sub>, TMT and Na<sub>2</sub>EDTA) on the heavy metals in lead–zinc tailings. The results reveal that the heavy metals lead and zinc in tailings are stabilized more effectively by using chelating agents TMT than by using inorganic chemical agents Na<sub>2</sub>S and NaH<sub>2</sub>PO<sub>4</sub>. When the dosage of TMT reaches 4%, the leaching concentration of lead and zinc is 0.18 and 14.60 mg/L according to toxicity characteristic leaching procedure (TCLP), and the stabilization efficiency of lead and zinc is 99.31% and 80.92%, respectively, while the leaching concentration of lead and zinc just drops to 0.41 and 16.00 mg/L with addition of 10% NaH<sub>2</sub>PO<sub>4</sub>. Furthermore, the leaching concentration of heavy metal lead in tailings treated by 4% Na<sub>2</sub>EDTA increases to 53.44 mg/L which far exceeds the standard of pollution control. Therefore, considering stabilization efficiency and dosage, TMT is the preferred agent for solidifying heavy metals in lead–zinc tailings.<b>GRAPHICAL </b></span>
environmental sciences
What problem does this paper attempt to address?
This paper aims to explore the effects of using different chemical reagents for the solidification/stabilization treatment of heavy metals in lead - zinc tailings. Specifically, the solidification/stabilization properties of four typical chemical reagents (Na2S, NaH2PO4, TMT and Na2EDTA) in lead - zinc tailings were studied. By comparing the stabilization effects of these reagents at different dosages, their stabilization efficiencies and mechanisms for the two heavy metals, lead and zinc, were evaluated. The paper particularly focused on the effective stabilization of lead and zinc by the organic chelating agent TMT at low dosages, as well as the stabilization effects of the inorganic reagents Na2S and NaH2PO4, and analyzed the extraction effect of Na2EDTA on lead and its stabilization effect on zinc. The research results show that at an addition amount of 4%, the stabilization efficiencies of TMT for lead and zinc reached 99.31% and 80.92% respectively, indicating a relatively high stabilization efficiency, and the required dosage is low and cost - effective. Therefore, considering the stabilization effect and dosage comprehensively, TMT is recommended as the preferred reagent for the solidification of heavy metals in lead - zinc tailings.