Abstract:The development of all-solid-state precise pH electrodes holds significant importance in various fields, particularly in marine scientific research. To achieve this goal, we proposed a novel fabrication technique for an all-solid-state ruthenium oxide (Ti/RuOx) pH electrode. We thin-coated the RuCl3 precursor solution on a titanium wire substrate using a heat gun repeatedly and then calcined it in a mixture of Li2CO3 and Na2O2 at 400 °C to obtain a ruthenium oxide (RuOx) film. This RuOx film was subjected to acid treatment with dilute nitric acid, and a polytetrafluoroethylene heat shrink tube was wrapped around the non-RuOx film area. Finally, the RuOx film was fully immersed in a pH 4.00 buffer solution, finalizing the electrode preparation. The RuOx film exhibits a dense and regular conical morphology. The Ti/RuOx electrode demonstrates a good near-Nernstian response slope (e.g., -59.04 mV/pH at 25 °C), high linearity (e.g., R2 = 0.9999), rapid response (<1 s), low hysteresis (<3 mV), excellent reversibility, and good repeatability in the pH range of 2.00-10.00. After full hydration, the Ti/RuOx electrode shows a potential drift of 8.5 mV and a drift rate of approximately 0.27 mV/day over a period of 25 days, indicating good long-term stability. Furthermore, the Ti/RuOx electrode exhibits robust resistance against interference from various ions and low-concentration redox substances, ensuring a long storage life (at least 280 days), and high measurement accuracy (e.g., ± 0.02 pH units) for diverse water samples, including seawater, freshwater, and tap water. This study has evaluated the potential of the Ti/RuOx electrode as a reliable and accurate tool for pH measurements in marine scientific applications.

A titanium nitride nanotube array for potentiometric sensing of pH.

Electrochemical sensor for detection of hydrazine based on Au@Pd core-shell nanoparticles supported on amino-functionalized TiO2 nanotubes

Characterization and Application of a Metallic Tungsten Electrode for Potentiometric Ph Measurements

A biocompatible titanium nitride nanorods derived nanostructured electrode for biosensing and bioelectrochemical energy conversion.

Carbon Nanotube Chemiresistor for Wireless pH Sensing

Nitrogen-doped carbon coated TiC nanofiber arrays deposited on Ti-6Al-4V for selective and sensitive electrochemical detection of dopamine

Titanium dioxide nanorod-based amperometric sensor for highly sensitive enzymatic detection of hydrogen peroxide

Fabrication and Characterization of a Cu-Zn-TiO<sub>2</sub>Nanotube Array Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater

Carbon Nanotube Field-Effect Transistor Based Ph Sensors

An All Solid State Electrochemical pH Sensor Based on Niobium Modified Electrode

Direct electrochemistry of cytochrome c immobilized on titanium nitride/multi-walled carbon nanotube composite for amperometric nitrite biosensor

Fabrication and Characterization of a Cu-Zn-TiO2 Nanotube Array Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater

Anodically Grown Pt(II) Oxide Microelectrode/Nanoelectrode pH Sensor

pH-modulated peroxidase-like PtNi nanowires-colorimetric "chemical nose" sensor array for detection and identification of thiophene compounds

A ruthenium oxide and iridium oxide coated titanium electrode for pH measurement

Arrays of nanofibers composed of a TiC core and a carbon coating for sensitive electrochemical detection of hydrazine

Nanochannel Templated Iridium Oxide Nanostructures for Wide-Range Ph Sensing from Solutions to Human Skin Surface.

Nano-p–n junction heterostructures enhanced TiO2 nanobelts biosensing electrode

Electrochemical sensors based on platinum-coated MOF-derived nickel-/N-doped carbon nanotubes (Pt/Ni/NCNTs) for sensitive nitrite detection

An All-Solid-State Ti/RuOx pH Electrode Prepared Based on the Thermal Oxidation Method

A Novel NO2 Sensor Based on TiO2 Nanotubes Array with In-Situ Au Decoration