Abstract:Purpose Long life and high hydrogen sensitivity are the crucial performance parameters for an optical fiber hydrogen sensing membrane, and these are the fundamental areas of study for an optical fiber hydrogen sensor. Considering that a traditional optical fiber hydrogen sensor based on pure palladium cannot meet the expectations for long life and rapid sensitivity simultaneously, the experiment in this paper designed a kind of reflective optical fiber bundle hydrogen gas sensor based on a Pd0.75–Ag0.25 alloy to achieve a hydrogen sensing system. This paper aims to discuss the issues with this system. Design/methodology/approach A reflective optical fiber bundle hydrogen sensor was made up of an optical fiber bundle and a Pd0.75–Ag0.25 alloy hydrogen membrane. A combination of optical fiber light intensity measurements and the reference calculation method were used to extract the hydrogen concentration information from within the optical fiber, and the relationship between the hydrogen concentration changes and the reflective light intensity in the optical fiber was established. Findings The reflective optical fiber bundle hydrogen gas sensor based on a Pd–Ag alloy membrane was shown to provide an effective way to detect hydrogen concentrations. The experimental results showed that a 20-30-nm-thick Pd0.75–Ag0.25 alloy membrane could reach high hydrogen absorption and sensitivity. Key preparation parameters which included sputtering time and substrate temperature were used to prepare the hydrogen membrane during the DC sputtering process, and the reflectivity of the Pd–Ag alloy membrane was enough to meet the requirements of long life and high hydrogen sensitivity for the optical fiber hydrogen sensor. Originality/value This paper seeks to establish a foundation for optimizing and testing the performance of the Pd–Ag alloy hydrogen sensing membrane for an optical fiber bundle hydrogen sensor. To this end, the optimal thickness and key preparation parameters for the Pd–Ag alloy hydrogen sensing membrane were discussed. The results of this research have proved that the reflective optical fiber hydrogen sensor based on a Pd0.75–Ag0.25 alloy is an effective approach and precisely enough for hydrogen gas monitoring in practical engineering measurements.

Highly Sensitive Fiber Taper Interferometric Hydrogen Sensors

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

Highly sensitive hydrogen sensor based on an in-fiber Mach-Zehnder interferometer with polymer infiltration and Pt-loaded WO3 coating

High-sensitivity Hydrogen Detection Based on Thermal-Optical Effect of Liquid Sealed in a Hollow-Core Fiber Interferometer

An All-Fiber Reflective Hydrogen Sensor Based on a Photonic Crystal Fiber In-Line Interferometer

Fabry–Pérot Cavities with Suspended Palladium Membranes on Optical Fibers for Highly Sensitive Hydrogen Sensing

Fabrication of hydrogen gas sensor using sputtered palladium-copper composite on tapered optical fiber

Optical Cascaded Fabry–Perot Interferometer Hydrogen Sensor Based on Vernier Effect

Experimental Research on A Reflective Optical Fiber Bundle Hydrogen Gas Sensor

Tip Hydrogen Sensor Based on Liquid-Filled In-Fiber Fabry–Pérot Interferometer with Pt-loaded WO3 Coating

Optical Fiber Hydrogen Sensor Based on the EVA/Pd Coated Hollow Fiber

A Sensor With Coating Pt/WO Powder With an Erbium-Doped Fiber Amplifier to Detect the Hydrogen Concentration

Investigation of the effect of the taper geometry on the sensitivity of tapered-fibre gas sensors

Optical Fiber Hydrogen Sensor with Single Sagnac Interferometer Loop Based on Vernier Effect

Multi-Point Optical Fiber Hydrogen Sensor With Fabry-Perot Interferometers Using Arrayed Waveguide Grating

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Ultra-High Sensitive Fiber Optic Hydrogen Sensor in Air

Optical Fiber Tip Acoustic Resonator for Hydrogen Sensing

S-Tapered Fiber Sensors for Highly Sensitive Measurement of Refractive Index and Axial Strain

Sub-cm Resolution Distributed Fiber Optic Hydrogen Sensing with Nano-Engineered TiO2

Hydrogen sensing performance investigations with optical heating and sensing element surface modification