Abstract:In this paper, we have proposed and experimentally demonstrated an optical fiber current sensing system based on optical carrier microwave interferometry (OCMI) technology and the virtual Vernier effect. The OCMI pattern in the electric domain is formed by the interference of optical carrier microwave signals reflected by two fiber Bragg gratings (FBGs). One FBG is attached to a giant magnetostrictive material (GMM): Terfenol-D as the sensing element, while the other one serves as the reference element. Current changes will cause axial tensile strain of the sensing FBG on the material and thus the wavelength of the sensing FBG will change, which will lead to a shift of the frequency of resonance dip of the OCMI pattern in the electric domain. By monitoring the frequency shift, the current change can be demodulated. Two FBGs with different distances (∼ 27 cm and ∼ 5 m) are employed in the experiment, which results in different FSRs and thus sensitivities of the proposed system. In the experiment, we obtained current sensitivities of −111.21 MHz/A and −2.65 MHz/A with increasing current when distances between two FBGs are ∼ 27 cm and ∼ 5 m, respectively. To further increase the sensitivity and improve the flexibility of the proposed system, the virtual Vernier effect is incorporated for the sensing system with FBGs’ distance of ∼ 5 m, without requiring an actual reference interferometer. When increasing current, the sensitivities are 19.82 MHz/A and 32.70 MHz/A by utilizing the virtual fundamental Vernier effect (FVE) and the virtual 1st-order harmonic Vernier effect (HVE), respectively. The proposed sensing system offers advantages such as tunable sensitivity, good repeatability and stability, high resolution, simple structure, and so on.

Optical Fiber Voltage Sensor Based on Michelson Interferometer Using Phase Generated Carrier Demodulation Algorithm

A Novel Demodulation Scheme of Fiber-Optic Interferometric Sensor Based on FM SSB Signal

Fiber Michelson Sensor Signal Processing by Using of Optical Bistable Device in Frequency Domain

An Optical Orthogonal Heterodyne Demodulation Technology for Interferometric Fiber-optic Sensor

Synchronous Carrier Extracting Method Based Demodulation Scheme for Fiber Optic Sensor Using Phase Generated Carrier

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation

Non-contact Fiber Vibration Sensor based on Intracavity Modulation of an Extrinsic Fabry-Perot Interferometer

Phase Demodulation Based on K-Space with High Sensitivity for Interferometric Fiber Sensor

Dual Fiber-Optic Fabry-Perot Interferometer Strain Sensor with Low-Cost Light-Emitting Diode Light Source

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

Distributed fiber optic sensor employing phase generate carrier for disturbance detection and location

Discrete amplified sensing of temperature and strain

An Optical Fiber Cantilever Beam Ultrasound Sensor Based on MI Structure

Quasi-distributed frequency-modulated continuous-wave reflectometric optical fiber strain sensor

Optical Fiber Bending Sensor Based on Michelson Interferometer

Fiber-optic current sensing system by using optical carrier microwave interferometry technology and virtual Vernier effect

Sensitivity enhanced fiber optic temperature sensor based on optical carrier microwave photonic interferometry with harmonic Vernier effect

An Integrated Fiber Michelson Interferometer Based on Twin-Core and Side-Hole Fibers for Multiparameter Sensing

Fabry-Perot Interferometer Curvature Sensor Based on Microwave Photonic Filter Technique

Remote Michelson Interferometric Phase Sensor Based on Dual-Core Fiber Transmission and Linear Phase Demodulation.

High Sensitivity Fabry-Perot Interferometer Based on Offset Splicing Fibers and Vernier Effect for Strain Measurement