Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Polythiophene-Based Chemical Sensors: Toward On-Site Supramolecular Analytical Devices

Polythiophene-based optical sensors for small molecules.

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

Chemical sensing based on water-gated polythiophene thin-film transistors

Multi-functional Flexible Sensor Based on Composite of Polyimide Aerogel and TiO2 Nanoparticles with Applications in Humidity Sensing, Water Sensing in Liquid and Photocatalysis

Morphology Tailoring of Nano/Micro-Structured Conductive Polymers, Composites and Their Applications in Chemical Sensors

Polythiophene derivatives as chemical sensors: a DFT study on the influence of side groups

Supramolecular optical sensor arrays for on-site analytical devices

Application of PEDOT:PSS and Its Composites in Electrochemical and Electronic Chemosensors

Direct Detection of Dilute Solid Chemicals with Responsive Lateral Organic Diodes

Conducting Polythiophenes With A Broad Spectrum Of Reactive Groups

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

Conductive imprinted polymeric interfacially modified electrochemical sensors based on covalently bonded layer-by-layer assembly of Gr/Au with flower-like morphology for sensitive detection of 2,4,6-TCP

Responsive polymers for detection and sensing applications: Current status and future developments

Mildly-doped polythiophene with triflates for molecular recognition

Poly(3,4-ethylenedioxythiophene) and Poly(3-octylthiophene-2,5-diyl) Molecules as Composite Transducers in Potentiometric Sensors—Synthesis and Application

Solution-gated transistors of two-dimensional materials for chemical and biological sensors: status and challenges

PEDOT:PSS: From conductive polymers to sensors

Versatile Titanium Dioxide Inverse Opal Composite Photonic Hydrogel Films Towards Multi-Solvents Chip Sensors

Target-Induced In Situ Formation of Organic Photosensitizer: A New Strategy for Photoelectrochemical Sensing

Recent Advances in Water-Soluble Polythiophenes for Biomedical Applications