Abstract:Li-ion batteries (LIBs) have demonstrated great promise in electric vehicles and hybrid electric vehicles. However, commercial graphite materials, the current predominant anodes in LIBs, have a low theoretical capacity of only 372 mAh·g-1, which cannot meet the ever-increasing demand of LIBs for high energy density. Nanoscale Si is considered an ideal form of Si for the fabrication of LIB anodes as Si-C composites. Synthesis of nanoscale Si in a facile, cost-effective way, however, still poses a great challenge. In this work, nanoscale Si was prepared by a controlled magnesiothermic reaction using diatomite as the Si source. It was found that the nanoscale Si prepared under optimized conditions (800°C, 10 h) can deliver a high initial specific capacity (3053 mAh·g-1 on discharge, 2519 mAh·g-1 on charge) with a high first coulombic efficiency (82.5%). When using sand-milled diatomite as a precursor, the obtained nanoscale Si exhibited a well-dispersed morphology and had a higher first coulombic efficiency (85.6%). The Si-C (Si: graphite = 1:7 in weight) composite using Si from the sand-milled diatomite demonstrated a high specific capacity (over 700 mAhg"1 at 100 mAg"1), good rate capability (587mAh·g-1 at 500 mA·g-1), and a long cycle life (480 mAh·g-1 after 200 cycles at 500 mA·g-1). This work gives a facile method to synthesize nanoscale Si with both high capacity and high first coulombic efficiency.

Preparation of uniform Si nanoparticles for high-performance Li-ion battery anodes.

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Regulation of Si Nanodomain Size and Its Effect on Electrochemical Performance in Prelithiated SiO Anode

Controlling of the Ratio of Submicron Particles and Size Effects in SiO Anode for Li-ion Batteries

Stirring-enabled formation of homogenous sub-50 nm silicon nanoparticles with a modified alumino-reduction of silica as high-performance anode materials

Low-cost and Scalable Preparation of Nano-Si from Photovoltaic Waste Silicon for High-Performance Li-ion Battery Anode

A novel three-dimensional cross-linked net structure of submicron Si as high-performance anode for LIBs

Fabrication of polypyrrole-coated silicon nanoparticle composite electrode for lithium-ion battery

Low-cost micron-sized silicon/carbon anode prepared by a facile ball-milling method for Li-ion batteries

Enhanced ion conductivity and electrode–electrolyte interphase stability of porous Si anodes enabled by silicon nitride nanocoating for high-performance Li-ion batteries

High-Performance Porous Silicon/Nanosilver Anodes from Industrial Low-Grade Silicon for Lithium-Ion Batteries.

Photo-Initiated in Situ Synthesis of Polypyrrole Fe-Coated Porous Silicon Microspheres for High-performance Lithium-ion Battery Anodes

Designed Formation of Yolk–Shell-Like N-Doped Carbon-Coated Si Nanoparticles by a Facile Method for Lithium-Ion Battery Anodes

Ionothermal Synthesis of Crystalline Nanoporous Silicon and Its Use As Anode Materials in Lithium-Ion Batteries.

Preparation and properties of porous silicon anode coated with nitrogen-doped carbon for lithium-ion battery

In situ synthesis of porous Si dispersed in carbon nanotube intertwined expanded graphite for high-energy lithium-ion batteries

Solution synthesis of porous silicon particles as an anode material for lithium ion batteries.

Controlled synthesis of nanosized Si by magnesiothermic reduction from diatomite as anode material for Li-ion batteries