Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Intercalation Pseudocapacitance in Ultrathin VOPO4 Nanosheets: Toward High-Rate Alkali-Ion-Based Electrochemical Energy Storage.

Intercalation Pseudocapacitance in 2D N-doped V2O3 Nanosheets for Stable and Ultrafast Lithium-Ion Storage

Effective Interlayer Engineering of Two-Dimensional VOPO4 Nanosheets Via Controlled Organic Intercalation for Improving Alkali Ion Storage.

Intercalation Pseudocapacitance in Flexible and Self-Standing V2O3 Porous Nanofibers for High-Rate and Ultra-Stable K Ion Storage

Pseudocapacitive Graphene‐Wrapped Porous VO2 Microspheres for Ultrastable and Ultrahigh‐Rate Sodium‐Ion Storage

VOPO<sub>4</sub>?2H<sub>2</sub>O Nanosheet Cathode for Enhanced Sodium Storage

VOPO4⋅2H2O Nanosheet Cathode for Enhanced Sodium Storage

Pseudocapacitive Layered Iron Vanadate Nanosheets Cathode for Ultrahigh-Rate Lithium Ion Storage

Fe2VO4 Nanoparticles Anchored on Ordered Mesoporous Carbon with Pseudocapacitive Behaviors for Efficient Sodium Storage

Enhancing Reversible Na-ion Intercalation by Introducing K-ions into Layered Vanadyl Phosphate for Sodium-Ion Battery Cathodes

Intercalation Pseudocapacitive Zn2+ Storage with Hydrated Vanadium Dioxide Toward Ultrahigh Rate Performance

Intercalation Pseudocapacitance of FeVO4·nH2O Nanowires Anode for High-Energy and High-Power Sodium-Ion Capacitor

Encapsulating V2O3 Nanoparticles in Hierarchical Porous Carbon Nanosheets Via C-O-V Bonds for Fast and Durable Potassium-Ion Storage.

2D VOPO4 Pseudocapacitive Ultrafast‐Charging Cathode with Multi‐Electron Chemistry for High‐Energy and High‐Power Solid‐State Lithium Metal Batteries

Ultrafast Sodium Storage Through Capacitive Behaviors in Carbon Nanosheets with Enhanced Ion Transport

Ultrafast Na‐Ion Storage in Amorphization Engineered Hollow Vanadium Oxide/MXene Nanohybrids for High‐Performance Sodium‐Ion Hybrid Capacitors

Porous ZrNb24O62 nanowires with pseudocapacitive behavior achieve high-performance lithium-ion storage

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Amylopectin-Assisted Fabrication of in Situ Carbon-Coated Na3V2(PO4)2F3 Nanosheets for Ultra-Fast Sodium Storage

Ultrathin Zn2(OH)3VO3 Nanosheets: First Synthesis, Excellent Lithium-Storage Properties, and Investigation of Electrochemical Mechanism.

Na(+) intercalation pseudocapacitance in graphene-coupled titanium oxide enabling ultra-fast sodium storage and long-term cycling