Abstract:High-power impulse magnetron sputtering (HiPIMS), a new physical vapor deposition technique which combines the advantages of the high ionization rates of the sputtered materials and control of electromagnetism, has been widely used to deposit high-performance coatings with a large density and high adhesion. However, HiPIMS has some intrinsic disadvantages such as the low deposition rate, unstable discharge, and different ionization rates for different materials thereby hampering wider industrial adoption. We have recently designed an optimized cylindrical source based on the hollow cathode effect to circumvent the aforementioned limitations. However, during the operation of the cylindrical source, the discharge is inhomogeneous and the etching stripes are nonuniform. In order to determine the underlying mechanism and optimize the electromagnetic control, the discharge in the HiPIMS cylindrical source is simulated. The tangential magnetic field distribution on the target surface of the cylindrical sputtering source is inhomogeneous and electron runaway is serious, resulting in a relatively low plasma density. Two solutions are proposed to improve the situations. The first one is electrical improvement by installing an electron blocking plate, and the second one is magnetic improvement by adding compensating magnets. Our simulation results of the first method show that a potential well is produced by the electron blocking plate to suppress electron runaway and the plasma density is improved significantly, especially around the central cross-section of the cylindrical sputtering source. The discharge becomes homogeneous, and the etching stripes are uniform albeit not full enough. The second method of magnetic improvement significantly improves the homogeneity of the tangential magnetic field distribution on the target surface and the target utilization rate. After adding the optimized compensating magnets, the shape of the effective area (the value of the tangential magnetic field in a range of 25-50 mT) on the target surface can be controlled and made zonal. The target utilization rate increases to over 80% from 60%. In order to obtain the optimal conditions, the two techniques are combined. A larger and more homogeneous etching ring is observed by adopting both the electrical and magnetic improvements as predicted and explained by the simulation results. It can be concluded that the combination of the two improvement techniques can improve and optimize the HiPIMS cylindrical source.

A Coaxial Nozzle Attachment Improving the Homogeneity of the Gas Flow Sputtering

Simulation and Experimental Research Based on Carrier Gas Flow Rate on the Influence of Four-Channel Coaxial Nozzle Flow Field

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

High-Yield Gas-Phase Condensation Synthesis of Nanoparticles to Enable a Wide Array of Applications

Modeling of non-Newtonian suspension plasma spraying in an inductively coupled plasma torch

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Numerical simulation and experimental investigation on powder transport of a new-type annular coaxial nozzle

Numerical Study on Powder Stream Characteristics of Coaxial Laser Metal Deposition Nozzle

Numerical and experimental investigation of close-coupled twin-nozzle gas atomization towards fine high-entropy alloy powder production

Study of optimization features of gas-powder jets created by a coaxial nozzle with divided powder supply during direct laser deposition of materials

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Powder flow simulation of a ring-type coaxial nozzle and cladding experiment in laser metal deposition

Effects of Coherent Structures on Nanoparticle Coagulation and Dispersion in a Round Jet

CFD Investigation of a Co-Flow Nozzle for Cold Spray Additive Manufacturing Applications

Improvement of titanium film uniformity by magnetron sputtering with electromagnetic coil design

Influence of discharge and jet flow coupling on atmospheric pressure plasma homogeneity

3D analysis of gas flow behavior and particle acceleration characteristics in cold spray additive manufacturing based on non-axisymmetric numerical models

Effect of the flow rate of the shielding gas on the species fluxes in the coaxial double-tube helium atmospheric pressure plasma jet

Numerical and experimental study on double coaxial gas assisted water jet guided laser machining of superalloy

The Fluid Flow Effect on the Inlet Injection of the Thin Film Deposition in a Square Type Atomic Layer Deposition Reactor

Electromagnetic Control and Optimization of High Power Impulse Magnetron Sputtering Discharges in Cylindrical Source