Abstract:In recent years, the utilisation of oxygen-deficient zirconia (ZrO 2-α ), commonly referred to as black zirconia, has garnered considerable attention due to its potential applications for solid oxide fuel cells (SOFCs), gas sensors, biomedical implant materials, and photocatalysis. However, current methods employed to manufacture ZrO 2-α exhibit noticeable limitations regarding their scalability, environmental sustainability, and cost-effectiveness. Our recent work has successfully demonstrated the feasibility for bulk conversion of conventional white zirconia into oxygen-deficient black zirconia through direct current (DC) plasma treatment (i.e. plasma blackening). This study elucidates the conditions for plasma blackening and provides a unique mechanism for the bulk transformation of zirconia. A systematic investigation of different plasma technologies (DC, active-screen plasma), treatment configurations (contact conditions, cathode material, and cathode potential), and treatment parameters (voltage, temperature, duration) uncover the crucial variables that influence the feasibility and rate of the reduction process. The reduction of zirconia is shown to initiate from localised contacting points at the cathode-facing surface and grow, with a hemispherical shape, towards the anode-facing surface. A series of development stages are proposed for the process, namely: bulk oxygen vacancy conductance, surface activation, oxygen vacancy generation and a moving cathode front. The findings of this study provide insights into the underlying mechanisms involved in the bulk-reduction of zirconia and help to pave the way towards future scalable and cost-effective generation of oxygen-deficient zirconia.

Oxygen Pump Based on Stabilized Zirconia.

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

A novel symmetrical bi-electrode supported ceramic oxygen pump for efficient oxygen production

A novel zincum-doped perovskite-type ceramic membrane for oxygen separation

A Novel Solid Oxide Electrochemical Oxygen Pump for Oxygen Therapy

Processing conditions and mechanisms for the plasma defect-engineering of bulk oxygen-deficient zirconia

Nonthermal atmospheric pressure plasma jet-assisted formation of oxygen vacancies stabilized tetragonal zirconia particles

Oxidation of Zirconium Diboride–silicon Carbide Ceramics under an Oxygen Partial Pressure of 200 Pa: Formation of Zircon

Electrochemical Technique to Characterize the High Temperature Oxidation Behavior of Materials

Electrical and Hydrogen Reduction Enhances Kinetics in Doped Zirconia and Ceria: II. Mapping Electrode Polarization and Vacancy Condensation in YSZ

Study on the Oxygen Diffusion Capacity of Black Zirconia by Molecular Dynamic Method

Oxygen Transport in Oxide Thin Film Structures Oriented La[sub 0.5]sr[sub 0.5]coo[sub 3−x] on Single-Crystal Yttria-Stabilized Zirconia

Influence of Through-Lamella Grain Growth on Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia As an Electrolyte in Solid Oxide Fuel Cells

Electrochemical Performance and Stability of Nano-Structured Co/PdO-co-impregnated Y2O3 Stabilized ZrO2 Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Zirconia Ceramics Consolidated by Oscillatory Pressure Sintering and Subsequent Carburization

Coupling of Dielectric Barrier Discharge Plasma with Oxygen Permeable Membrane for Highly Efficient Low-Temperature Permeation

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Fabrication Of High Performance Oxygen Sensors Using Multilayer Oxides With High Interfacial Conductivity

Optimisation on the stability of CaO-doped partially stabilised zirconia by microwave heating

A review of high-temperature electrochemical sensors based on stabilized zirconia

Fabrication of (Sm, Ce)O2−δ interlayer for yttria-stabilized zirconia-based intermediate temperature solid oxide fuel cells