Abstract:The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and polyhydroxybutyrate (PHB) biopolymer composites reinforced with thermally treated wood flour and to determine the formulations having optimum properties by using multi-criteria decision-making (MCDM) methods. As a filler, Scots pine wood flour (untreated and thermally treated at 212 °C) was used at the loading rates of 10% and 30%. The samples were prepared using a twin-screw extruder and then by compression molding. The results showed that the addition of both thermally treated and untreated wood flour slightly increased the density of the composites. According to the color measurement, the thermally treated wood composites were slightly darkened in appearance. In the composites, with both wood fillers, the water absorption and thickness swelling ratios had increased during the 20–250 days of water exposure. Lower water absorption and thickness swelling rates were found for the composites with thermally treated wood filler compared to the other composites. The wood fillers generally lowered the mechanical properties of the PLA and PLA/PHB composites, with the PHB composites as the exception. However, the tensile modulus and Izod impact strength of the composites generally increased with the addition of wood fillers. Morphological examination performed by scanning electron microscopy (SEM) indicated that the wood flour was mostly homogeneously distributed in the matrix, which improved the mechanical properties of the composites. Thermogravimetric analysis (TGA) showed that the addition of wood filler to the neat biopolymers as a rule did not provide significant improvement in the thermal stability; however, the fillers increased the thermal stability of neat PHB. The Fourier-transform infrared (FTIR) spectroscopy detected no differences in the chemical structure of the composites. The X-ray diffraction (XRD) results indicated a general increase in the crystallinity with the addition of wood fillers to the neat biopolymers and the blends. All the findings were subjected to MCDM analysis to determine the formulation having the optimum properties and the results showed this to be the neat PLA sample.

Quantification of Wood Flour and Polypropylene in Chinese Fir/Polypropylene Composites by Ftir

[The Use of FTIR Coupled with Partial Least Square for Quantitative Analysis of the Main Composition of Bamboo/Polypropylene Composites]

Quantitative Analysis of Biomass in Three Types of Wood-Plastic Composites by FTIR Spectroscopy

Measurement of Properties of Polypropylene Copolymers by Raman Spectrum

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Characterization and Prediction of Mechanical and Chemical Properties of Luanta Fir Wood with Vacuum Hydrothermal Treatment

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Investigation of Pp/Pe Blend with Ftir Mapping

Isothermal Crystallization Kinetics of Highly Filled Wood Plastic Composites: Effect of Wood Particles Content and Compatibilizer

Comparative study of some properties of wood plastic composite materials produced with polyethylene, wood flour, and glass flour

Direct Chemical Characterization of Natural Wood Resins by Temperature-Resolved and Space-Resolved Fourier Transform Infrared Spectroscopy

Insight into the Surface Properties of Wood Fiber-Polymer Composites

Wood‐thermoplastic Composites from Wood Flour and High‐density Polyethylene

Preparation, Structure and Properties of Long Chain Branching Polypropylene/Wood Flour Composites

DETERMINATION OF THE CONTENT OF EACH COMPONENT IN POLYPHENYLENE OXIDE-POLYSTYRENE BLENDS BY FOURIER TRANSFORM INFRARED SPECTROSCOPY

Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets

Rapidly and accurately determining the resin and volatile content of CF/PPBESK thermoplastic prepreg by NIR spectroscopy

Thermal Analysis of Anti-ultraviolet Poly(vinylidene fluoride)/Wood Flour Composites

Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and wide-angle X-ray scattering (WAXS) of polypropylene (PP)/cyclic olefin copolymer (COC) blends for qualitative and quantitative analysis

Enhanced water resistance of extruded wood–polypropylene composites based on alternative wood sources

Investigate on the physical and mechanical properties of wood-polymer composition materials made on the premise of neighborhood wood flours