Abstract:We report a new nBn photodetector (nBn-PD) design based on the InAlSb/AlSb/InAlSb/InAsSb material systems for mid-wavelength infrared (MWIR) applications. In this structure, delta-doped compositionally graded barrier (δ-DCGB) layers are suggested, the advantage of which is creation of a near zero valence band offset in nBn photodetectors. The design of the δ-DCGB nBn-PD device includes a 3 μm absorber layer (n-InAs 0.81 Sb 0.19 ), a unipolar barrier layer (AlSb), and 0.2 μm contact layer (n-InAs 0.81 Sb 0.19 ) as well as a 0.116 μm linear grading region (InAlSb) from the contact to the barrier layer and also from the barrier to the absorber layer. The analysis includes various dark current contributions, such as the Shockley–Read–Hall (SRH), trap-assisted tunneling (TAT), Auger, and Radiative recombination mechanisms, to acquire more precise results. Consequently, we show that the method used in the nBn device design leads to diffusion-limited dark current so that the dark current density is 2.596 × 10 −8 A/cm 2 at 150 K and a bias voltage of − 0.2 V. The proposed nBn detector exhibits a 50% cutoff wavelength of more than 5 μm, the peak current responsivity is 1.6 A/W at a wavelength of 4.5 μm and a − 0.2 V bias with 0.05 W/cm 2 backside illumination without anti-reflective coating. The maximum quantum efficiency at 4.5 μm is about 48.6%, and peak specific detectivity ( D *) is of 3.37 × 10 10 cm⋅Hz 1/2 /W. Next, to solve the reflection concern in this nBn devices, we use a BaF 2 anti-reflection coating layer due to its high transmittance in the MWIR window. It leads to an increase of almost 100% in the optical response metrics, such as the current responsivity, quantum efficiency, and detectivity, compared to the optical response without an anti-reflection coating layer.

Independently Accessible Dual-Band Barrier Infrared Detector Using Type-II Superlattices

Long and Very Long Wavelength InAs/InAsSb Superlattice Complementary Barrier Infrared Detectors

Long wavelength InAs/InAsSb superlattice barrier infrared detectors with p-type absorber quantum efficiency enhancement

Design and modeling of high-performance mid-wave infrared InAsSb-based nBn photodetector using barrier band engineering approaches

High-performance InP-based bias-tunable near-infrared /extended-short wave infrared dual-band photodetectors

A Thermoelectrically Cooled nBn Type‐II Superlattices InAs/InAsSb/B‐AlAsSb Mid‐Wave Infrared Detector

Bias–selectable nBn dual–band long–/very long–wavelength infrared photodetectors based on InAs/InAs1−xSbx/AlAs1−xSbx type–II superlattices

Dark-Current-Blocking Mechanism in BIB Far-Infrared Detectors by Interfacial Barriers

Long-wavelength InAs/GaSb superlattice double heterojunction infrared detectors using InPSb/InAs superlattice hole barrier

Design of uncooled mid-wave infrared detectors based on lead selenide barrier structure

Electrical Characteristics of a Ga-free T2SL Mid-wave Infrared nBn Detector Based on an InAs/AlAsSb/InAsSb Barrier

High performance bias-selectable three-color Short-wave/Mid-wave/Long-wave Infrared Photodetectors based on Type-II InAs/GaSb/AlSb superlattices

Mid-wavelength high operating temperature barrier infrared detector and focal plane array

Comparison of type II superlattice InAs/InAsSb barrier detectors operating in the mid-wave infrared range

Low dark current Sb-based short-wavelength infrared photodetector

Blocked Impurity Band Very Long Wavelength Infrared Detector

Ge-based Mid-Infrared Blocked-Impurity-band Photodetectors

Ultrahigh-performance superlattice mid-infrared nBn photodetectors at high operating temperatures

High-Performance Midwave Type-II Superlattice Infrared Photodetectors With a Stepped InAs/GaSb Absorber

InAs/InAsSb Type-II Strained-Layer Superlattice Infrared Photodetectors

InAs/GaSb Type-II superlattice (T2SL) photodetector operating in the very-long wavelength infrared (VLWIR) spectral domain