Abstract:A comprehensive modeling framework for the thermoforming of polymer matrix woven laminate composite was developed. Two numerical indicators, the slip path length and traction magnitude, have been identified to be positively correlated to matrix smearing and wrinkling defects. The material model has been calibrated with picture-frame experimental results, and the prediction accuracy for intra-ply shear and thickness distribution was examined with measurements of the physically formed parts. Specifically, thickness prediction for most locations on the formed parts was accurate within an 11.6% error margin. However, at two points with significant intra-ply shear, the prediction errors increased to around 20%. Finally, a parametric study was conducted to determine the relationship between various process parameters and the quality of the formed part. For the trapezoidal part, orienting the laminate at 45 degrees to the mold axis reduces the likelihood of matrix smear and wrinkling defects. Although this laminate orientation yielded a greater spatial variation in part thickness, the thickness deviation is lower than that for the 0-degree orientation case. Two forming analyses were conducted with ramp rates of 25 mm/s and 80 mm/s to match the equipment's operational limits. It was observed that higher forming rates led to a greater likelihood of defects, as evidenced by a 15% and 10% increase in the formed part areas with longer slip paths and higher traction magnitudes, respectively. It was discovered that shallower molds benefit from faster ramp rates, while deeper molds require slower rates to manage extensive shearing, stretching and bending. Faster forming rates lead to smaller thickness increases at high intra-ply shear regions, indicating a shift from intra-ply shear to out-of-plane bending due to the visco-plastic effect of the molten laminate and can negatively impact part quality. Lastly, it was shown that a well-conceived strategy using darts could improve the part quality by reducing the magnitude of the defect indicators.

Modeling of the thermoforming process of paperboard composites for packaging

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Characterization and Modeling of Out-of-Plane Behavior of Fiber-Based Materials: Numerical Illustration of Wrinkle in Deep Drawing

Multi-scale finite element simulation of the thermoforming of a woven fabric glass fiber/polyetherimide thermoplastic composite

Temperature-Dependent modelling of tension, in-Plane shear, and bending behaviour in non-isothermal thermo-Stamping process simulation of unidirectional UHMWPE fibre reinforced thermoplastic TPU composites

The effects of pretreatment and coating on the formability of extrusion‐coated multilayer paperboard–plastic composites

A case study: Mechanical modeling optimization of cellular structure fabricated using wood flour-filled polylactic acid composites with fused deposition modeling

Coupling of injection molding process to mechanical properties of short fiber composites: A through process modeling approach

Structure Design on Thermoplastic Composites Considering Forming Effects

Experiment Study of Thermoforming of Plain Woven Composite (Carbon/thermoplastics)

Deep-drawing of paper and paperboard: The role of material properties

Thermal Analysis of Cylindrical Molds Using Thermoplastic Composite During Robotic Fiber Placement

On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics

Thermo-mechanical Modeling of Woven Fabric Reinforced Shape Memory Polymer Composites

Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method

A lamination model for thermostamping of carbon woven fabric reinforced thermoplastic resin composites

Numerical Modelling of the Thermoforming Behaviour of Thermoplastic Honeycomb Composite Sandwich Laminates

Micromechanical Modeling of Viscoplastic Behavior of Laminated Polymer Composites with Thermal Residual Stress Effect

Comparative study of the thermomechanical properties of natural fiber reinforced thermoplastic composites: A structural application for quadcopter design

Effects of Thermoforming Parameters on Woven Carbon Fiber Thermoplastic Composites