Abstract:The thermohydrodynamic analysis of oil film bearing is essential for high speed oil film bearing. The temperature field is coupled with the pressure field. The numerical model can be built or chosen according to the complexity of the objects and requirement of the accuracy. In this paper, four pressure-thermal (P-T) models are proposed, which are zero-dimensional temperature field coupled with Reynolds equation (OD P-T model), two-dimensional temperature field coupled with Reynolds equation (2D P-T model), two-dimensional temperature with third dimensional correction coupled with Dawson equation (2sD P-T model), three-dimensional temperature field coupled with Dawson equation (3D P-T model). The non-Newtonian and temperature-viscosity effects of the lubrication oil are considered in all the four models. Two types of cylindrical journal bearing, the bearing with/without axial grooves, are applied for the simulation. All the simulated cases are compared with the solutions of the CFX. The results show that the OD P-T model fails to predict the behavior of high speed bearing; The 2D and 2sD P-T model have an acceptable accuracy to predict the performance of the bearing without grooves, but are not able to simulate the P-T field of the bearing with grooves because of the under-developed thermal boundary layer; The 2sD P-T model shows a great improvement when calculating the pressure field compared with the 2D P-T model; the 3D P-T model coincides well with the CFX at any condition. The comparison of these four models provides a reference to help designer choose a proper numerical model for a certain project.

Oil Film Thickness in Engine Connecting-Rod Bearing With Consideration of Thermal Effects: Comparison Between Theory and Experiment

A study on the influence of oil film lubrication to the strength of engine connecting rod components

Lubricant Shear Thinning Analysis of Engine Journal Bearings

An experimental and analytical investigation of the evaporation characteristics of engine oil film

The Effects of Ultra-Low Viscosity Engine Oil on Mechanical Efficiency and Fuel Economy

Thermo-Elastohydrodynamic Analysis of Connecting Rod Bearing in Internal Combustion Engine

Lubricating Simulation Analysis of Connecting Rod Bearing Based on AVL-EXCITE

The Effects of Crankshaft Lobing on Connecting Rod Bearings

Effects of oil film properties on roller bearing with light loads under various slip factors

Influence of Shear-thinning Effect on the Characteristics of Journal Film Bearing

Measurement of oil film thickness of a connecting-rod big end bearing by using image processing technique

A Study On the Oil Film Thickness Between the Lower Rail of Oil Control Ring and Lower Flank of Oil Control Ring Groove of an Engine

Effect of Microcontent of Oil in Water under Confined Condition

A Novel Quasi-3d Thermodynamic Model Of Oil Film Bearing With Non-Newtonian And Temperature-Viscosity Effects

Influence of MoS2 and PTFE in Oil Film Characteristics and Tribological Performance in EHL Point Contacts

Numerical Investigation of Air–Oil–Thermal Coupling Mechanism in Floating Ring Bearings

Lubrication Analysis of a Connecting-Rod Bearing in a High-Speed Engine. Part II: Lubrication Performance Evaluation for Non-Circular Bearings

Lubricating Properties of Aviation Oil 4010 under High-pressure Micro Clearance

Analysis of Thermal Effect on Elastohydrodynamic Lubrication in Angular Contact Ball Bearing

The Comparison Of Four Pressure-Thermal Models Of Oil Film Bearing With The Non-Newtonian And Temperature-Viscosity Effects