Abstract:To date, more than fifty articles have been published on the feasibility studies of zinc and its alloys as biodegradable metals. These preliminary in vitro and in vivo studies showed acceptable biodegradability and reasonable biocompatibility in bone and blood microenvironments for the experimental Zn-based biodegradable metals and, for some alloy systems, superior mechanical performance over Mg-based biodegradable metals. For instance, the Zn-Li alloys exhibited higher UTS (UTS), and the Zn-Mn alloys exhibited higher elongation (more than 100%). On the one hand, similar to Mg-based biodegradable metals, insufficient strength and ductility, as well as relatively low fatigue strength, may lead to premature failure of medical devices. On the other hand, owing to the low melting point of the element Zn, several new uncertainties with regard to the mechanical properties of biomedical zinc alloys, including low creep resistance, high susceptibility to natural aging, and static recrystallization (SRX), may lead to device failure during storage at room temperature and usage at body temperature. This paper comprehensively reviews studies on these mechanical aspects of industrial Zn and Zn alloys in the last century and biomedical Zn and Zn alloys in this century. The challenges for the future design of biomedical zinc alloys as biodegradable metals to guarantee 100% mechanical compatibility are pointed out, and this will guide the mechanical property design of Zn-based biodegradable metals. STATEMENT OF SIGNIFICANCE: Previous studies on mechanical properties of industrial Zn and Zn alloys in the last century and biomedical Zn and Zn alloys in this century are comprehensively reviewed herein. The challenges for the future design of zinc-based biodegradable materials considering mechanical compatibility are pointed out. Common considerations such as strength, ductility, and fatigue behaviors are covered together with special attention on several new uncertainties including low creep resistance, high susceptibility to natural aging, and static recrystallization (SRX). These new uncertainties, which are not significantly observed in Mg-based and Fe-based materials, are largely due to the low melting point of the element Zn and may lead to device failure during storage at room temperature and clinical usage at body temperature. Future studies are urgently needed on these topics.

In Vitro Degradation of Biodegradable Metal Zn and Zn/Fe-couples and Their Application As Conductors in Biodegradable Sensors

In Vitro Evaluation of the Feasibility of Commercial Zn Alloys As Biodegradable Metals

In Vitro Study on Mg e Sn e Mn Alloy as Biodegradable Metals

In Vitro Corrosion Behavior of Zn3Mg0.7Y Biodegradable Alloy in Simulated Body Fluid (SBF)

Microstructure, Mechanical Properties, and in Vitro Corrosion Behavior of Biodegradable Zn-1Fe-xMg Alloy

Research status and future prospects of biodegradable Zn-Mg alloys

Laser Sintering of Zn Microparticles and Its Application in Printable Biodegradable Electronics

Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application

Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility

Electrochemical stability of biodegradable Zn-Cu alloys through machine-learning accelerated high-throughput discovery

Advances on biodegradable zinc-silver-based alloys for biomedical applications

A Comprehensive Review of the Current Research Status of Biodegradable Zinc Alloys and Composites for Biomedical Applications

Microstructural and Electrochemical Influence of Zn in MgCaZn Biodegradable Alloys

Improved mechanical, degradation, and biological performances of Zn-Fe alloys as bioresorbable implants

Opportunities and challenges of biodegradable Zn-based alloys

Fabrication and Properties of a Biodegradable Zn-Ca Composite

Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr

Development of Biodegradable Zn Based Medical Implants

Maskless Patterning of Biodegradable Conductors by Selective Laser Sintering of Microparticle Inks and Its Application in Flexible Transient Electronics

Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants

An in vitro and in vivo study of biodegradable Zn–Cu–Li alloy with high strength and ductility fabricated by hot extrusion combined with room-temperature ECAP