Abstract:In HTS power devices, the presence of iron cores changes the magnetic field profile around the HTS coil windings, potentially affecting their AC loss characteristics. AC loss measurements for HTS coil windings coupled with an iron core using the electrical method can lead to a significant error, owing to the indirect estimation of the iron core loss through using a copper test coil. To investigate the cause of the experimental error and the influence of an iron core on coil AC losses, transport AC losses of REBCO double pancake coil (DPC) assemblies coupled with an iron cylinder were measured. A 40-turn 1DPC and an 80-turn 2DPC assembly wound with 4 mm SuperPower wire were employed in the measurements. To ensure the same iron core loss using the HTS coil assembly and the copper coil, 2D finite element method (FEM) simulations were conducted iteratively to design the iron core and the copper coil to get the same local magnetic field distributions in the designed iron core for the two cases. The main cause of the error is due to the difference in local magnetic flux densities in the iron core generated by the HTS coil assembly and the copper coil even when the ampere-turns of the coils are identical. We showed that the simulation-guided measurement method can assure accurate AC loss measurement in the HTS coil assemblies coupled with iron cores. Compared with the AC losses in the 1DPC and 2DPC coil assemblies without the iron cylinder, the presence of the iron cylinder significantly increases the coil losses. Frequency dependence is observed in the coil AC losses of the 1DPC and 2DPC assemblies when coupled with the iron cylinder. This is due to the eddy current induced in the iron cylinder generating a magnetic field, which influences the coil AC loss.

Analytical Study and Corresponding Experiments for Iron Loss Inside Laminated Core under Ac-Dc Hybrid Excitation.

Determination of the Contribution of Dc Component to Stray-Field Loss under Ac-Dc Hybrid Excitation.

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Evaluation of the Calculation Method for Stray Losses in Structural Parts of HVDC Converter Transformers

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Improvement of core loss model under AC–DC hybrid excitation and verification based on TEAM P21 extended model

Iron Loss Separation in High Frequency Using Numerical Techniques

Calculation of core loss under distorted flux density with minor hysteresis loops for laminated steel structure

Loss Calculation of Iron Core under DC Bias and Harmonic Disturbance Conditions

A DC Differential Method for Core Loss Measurement under Sinusoidal Excitation

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

A General and Accurate Iron Loss Calculation Method Considering Harmonics Based on Loss Surface Hysteresis Model and Finite-Element Method

Simulation of AC Loss in Small HTS Coils with Iron Core

Numerical Study On Ac Loss Of An Hts Coil Placed On Laminated Silicon Steel Sheets With Distorted Ac Transport Currents

Calculation and Analysis of Iron Loss in Homopolar Inductor Alternator

Accurate Analysis of Core Loss Considering the Non-uniform Magnetic Flux Distribution for High-Frequency-Transformer in Dual-Active-Bridge DC-DC Converter

Experimental AC loss study on REBCO coil assemblies coupled with an iron cylinder

A Simplified Iron Loss Model for Laminated Magnetic Cores

A study on iron loss analysis method considering the harmonics of the flux density waveform using iron loss curves tested on epstein samples

Evaluation of Iron Loss Models in Electrical Machines