Abstract:This work proposes a new effective method to realize variable thrust through discontinuous embedded metal wires in the solid rocket motor (SRM). We aimed to study the influence of discontinuous embedded metal wires on the performance of an SRM with a single-burning-rate grain. A model based on convection heat transfer, heat conduction, and heat radiation was established to calculate the heat transfer in the discontinuous embedded metal wires in the grain, to then obtain the burning rate ratio. Most importantly, a solid rocket motor was designed to verify the feasibility of variable thrust and of the present model prediction, with the embedded silver–nickel alloy wire divided into two segments in the grain. According to the SRM ignition experiment, the silver–nickel alloy wires raised the burning rate of the grain. The pressure varied regularly with changes in the discontinuous embedded metal wires. The theoretical burning rate ratio matched the experimental result well. Based on the verified model, the effects of the burning rate, pressure exponent, burning rate ratio, and number of wires on thrust were investigated. Burning rate, burning rate ratio, and pressure exponent were found to be positively correlated with thrust ratio. The thrust ratio could reach 12.5 when the burning rate ratio was 5. The ability to adjust thrust tended to increase with an increase in the number of wires. This study also provided a method to assess whether the consecutive embedded metal wires had been broken or not. The method using discontinuous embedded metal wires in the grain was proven to be feasible to realize multi-thrusts of single-burning-rate grain, which is a new idea for the design of a multi-thrust SRM.

Research on the Design and Bidirectional Work Process of Metal Diaphragms in Small Double-Pulse Solid Rocket Motors

Investigation on metal diaphragm of pulse separation device in dual-pulse solid rocket motor

Research on the Safety of Long Term Storage Solid Rocket Motor with Debonded Layer

Experimental Research on Electron Density in Solid-Rocket Motor Plume

Bioinspired Microgroove's Geometry Design and Finite Element Analysis of Bursting Influence Parameters for Metal-based Rupture Diaphragms

Research on Yokeless Double-Sided Multi-Tooth Flux-Switching Linear Motor

Investigation of Burst Pressure of Flat-Scored Metal Diaphragms in Hypersonic Impulse Facilities

Numerical Simulation on Cold-Flow Impact of the Soft Pulse Separation Device in Dual Pulse Solid Rocket Motor

Effects of Structural Parameters and Rigidity of Driving Diaphragm on Flow Characteristics of Micro Valveless Pump.

Simulation and Application of a New Multiphase Flow Ablation Test System for Thermal Protection Materials Based on Liquid Rocket Engine

Optimization and Testing of DC Electromagnetic Pump for Liquid Metal Space Use

Experimental study on the internal temperature rise of a high-speed canned motor pump for liquid rocket engines

Dynamic Impact Deformation Characteristics of Multi-Layer Metallic Materials Based on a New Combustion Propulsion Pattern

Strength Check for a Solid Rocket Motor Shell based on Integrated Joint Simulation

Tuning the Ballistic Performance of a Single-Burning-Rate Grain Solid Rocket Motor via New Discontinuous Embedded Metal Wires

Pressure oscillation and suppression method of large-aspect-ratio solid rocket motors

Ablation Characteristics Research in Solid Rocket Motor's Combustion Chamber Produced by 3D Printing

Influence of diaphragm properties on shock wave transmission

Design of a Double-Layer Electrothermal MEMS Safety and Arming Device with a Bistable Mechanism

Simulation and Experimental Studies on a Micro Diaphragm Air Pump Actuated by PZT

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device