Abstract:Conductive polyelectrolytes such as P3CT-Na have been widely used as efficient hole-transporting layers (HTLs) in inverted perovskite solar cells (PSCs) due to their high hole mobility. However, the acid–base neutralization reaction is indispensable for preparing such polyelectrolytes and the varied content of cations usually leads to poor reproducibility of the device performance in PSCs. In this work, a commercially available polymer poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT) was directly applied as an HTL in PSCs for the first time. Encouragingly, it was found that due to the dual functionality of carboxyl groups on side chains, a thin layer of P3CT can not only strongly anchor on ITO electrode and optimize its work function but also show an effective passivation effect toward perovskite active layer. Benefiting from such dual functionality, a uniform perovskite film with better quality was obtained on P3CT. As a result, the P3CT-based PSCs show much lower nonradiative recombination and achieve a champion power conversion efficiency (PCE) of 21.33% with a high fill factor (FF) of 83.6%. Impressively, as the device area is increased to 0.80 cm<sup>2</sup>, a PCE of 19.65% can still be obtained for the PSCs based on P3CT HTL. Our work provides important strategy for developing HTLs for high-performance PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00729?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00729</a>.Detailed experimental procedures including materials, PSC device fabrication and characterization, and the detailed data of DFT calculation, UV–vis absorption, FTIR, XRD, and AFM morphology characterization (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00729/suppl_file/am1c00729_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Hydrophilic Conjugated Polymers with Large Bandgaps and Deep-Lying Homo Levels As an Efficient Cathode Interlayer in Inverted Polymer Solar Cells

High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO

High Efficiency and High V-Oc Inverted Polymer Solar Cells Based on A Low-Lying Homo Polycarbazole Donor and A Hydrophilic Polycarbazole Inter Layer on Ito Cathode

Using Ultra-High Molecular Weight Hydrophilic Polymer As Cathode Interlayer for Inverted Polymer Solar Cells: Enhanced Efficiency and Excellent Air-Stability

Organic/Organic Cathode Bi-Interlayers Based on a Water-Soluble Nonconjugated Polymer and an Alcohol-Soluble Conjugated Polymer for High Efficiency Inverted Polymer Solar Cells.

Hydrophilic Poly(triphenylamines) with Phosphonate Groups on the Side Chains: Synthesis and Photovoltaic Applications

High-efficiency Polymer Solar Cells Via the Incorporation of an Amino-Functionalized Conjugated Metallopolymer As a Cathode Interlayer.

Hydrophobic Fluorinated Conjugated Polymer as a Multifunctional Interlayer for High-Performance Perovskite Solar Cells

Designing Thickness-Insensitive Cathode Interlayers via Constructing Noncovalently Conformational Locks for Highly Efficient Non-fullerene Organic Solar Cells

Molecular Engineering on Bis(benzothiophene-S,S-dioxide)-Based Large-Band Gap Polymers for Interfacial Modifications in Polymer Solar Cells

A Dual-Functional Conjugated Polymer as an Efficient Hole-Transporting Layer for High-Performance Inverted Perovskite Solar Cells

Nonconjugated Self-Doped Polymer Zwitterions as Efficient Interlayers for High Performance Organic Solar Cells

Design and Synthesis of Wide-bandgap Conjugated Polymers Based on 3,4-Dicyanothiophene for Efficient Organic Solar Cells

Efficient Organic-Inorganic Hybrid Cathode Interfacial Layer Enabled by Polymeric Dopant and Its Application in Large-Area Polymer Solar Cells

Polymerized naphthalimide derivatives as remarkable electron‐transport layers for inverted organic solar cells

Synthesis And Photovoltaic Properties From Inverted Geometry Cells And Roll-To-Roll Coated Large Area Cells From Dithienopyrrole-Based Donor-Acceptor Polymers

Non-conjugated polymers as thickness-insensitive electron transport materials in high-performance inverted organic solar cells

Investigation of A Conjugated Polyelectrolyte Interlayer for Inverted Polymer:Fullerene Solar Cells

Conjugated polymers with deep LUMO levels for field-effect transistors and polymer–polymer solar cells

Solar Cells: Amino-Functionalized Conjugated Polymer As an Efficient Electron Transport Layer for High-Performance Planar-Heterojunction Perovskite Solar Cells (adv. Energy Mater. 5/2016)

Water-soluble anionic polymer electrolytes based on polyfluorene as the universal interlayer for organic solar cells