Abstract:Diketopyrrolopyrrole (DPP) is attractive for building conjugated polymers for polymer solar cell (PSC) and organic field effect transistor (OFET). Yet the usual access to DPP conjugated polymers is via donor-acceptor (D-A) two-component polymerization. However, the number of excellent polymers based on the D-A combination is still limited, which promotes researchers to explore new strategy for preparation of novel conjugated polymers and to understand their structure-property relationship. In this work, a DPP-based polymer P1 was first obtained with co-polymerization of DPP (A) and alkoxyl benzene (D). Further, two novel polymers (P2 and P3) were developed via introducing a third electron-deficient monomer X (difluoro-benzothiadiazole or naphthalene diimide) in the polymerization process. P1 - P3 polymers (molecular weight: 3.83 x 10(4), 5.30 x 10(4) and 6.56 x 10(4)) showed good solubility in common organic solvents. Due to the hybridization of the molecular orbitals between their three components (D, A and X), P2 and P3 showed narrower bandgaps (1.26 and 1.27 eV) than P1, and their absorption thus red-shifted up to 1000 nm in comparison to that of D-A polymer P1 (bandgap of 1.50 eV). The introduction of electron-deficient monomers also deepened the highest occupied molecular orbital (HOMO) levels of P2 and P3 to -5.28 and -5.33 eV, which was beneficial to a larger open circuit voltage (V-OC) in PSCs. Moreover, the introduction of the third monomer X altered the film properties of the polymers. It showed that P1 with preference of face-on orientation exhibited a good power conversion efficiency (PCE) in PSCs, while P2 demonstrated an improved hole mobility in OFET due to the preferable edge-on orientation. When blended with [6,6]-phenyl-C-71-butyric acid methyl ester (PC71BM), P1 showed a PCE of 2.56%, with a V-OC of 0.68 V, a short circuit current density (J(SC)) of 5.71 mA cm(-2) and a fill factor (FF) of 0.66, while P2 gave a lower PCE of 1.79%, with a V-OC of 0.71 V, a J(SC) of 3.91 mA cm(-2) and a FF of 0.65. This work provides references for the design of novel conjugated polymers for PSCs and OFETs.

Conjugated polymers with deep LUMO levels for field-effect transistors and polymer–polymer solar cells

Pyridine-bridged diketopyrrolopyrrole conjugated polymers for field-effect transistors and polymer solar cells

Poly(pentacyclic lactam-alt-diketopyrrolopyrrole) for field-effect transistors and polymer solar cells processed from non-chlorinated solvents

Dithienopicenocarbazole-Based Acceptors For Efficient Organic Solar Cells With Optoelectronic Response Over 1000 Nm And An Extremely Low Energy Loss

A High-Mobility Electron-Transport Polymer with Broad Absorption and Its Use in Field-Effect Transistors and All-Polymer Solar Cells

A Thiadiazole‐Based Conjugated Polymer with Ultradeep HOMO Level and Strong Electroluminescence Enables 18.6% Efficiency in Organic Solar Cell

Low bandgap copolymer of 1,4-diketopyrrolo[3,4-c]pyrrole and thieno[3,2-b]thiophene: Synthesis and applications in polymer solar cells and field-effect transistors

Copolymers of perylene diimide with dithienothiophene and dithienopyrrole as electron-transport materials for all-polymer solar cells and field-effect transistors

Design and Synthesis of Wide-bandgap Conjugated Polymers Based on 3,4-Dicyanothiophene for Efficient Organic Solar Cells

Photovoltaic Properties of DPP-based Two- and Three-component Polymers

Thiophene-Fused Perylenediimide-Based Polymer Acceptors for High-Performance All-Polymer Solar Cells

4,5-Ethylene-2,7-carbazole-based Medium-Bandgap Conjugated Polymers with Low-Lying Homo Levels Toward Efficient Polymer Solar Cells with High Open-Circuit Voltage

New –(d–a1–d–a2)n– Type Conjugated Polymers for Photovoltaic Applications: Consensus Between Low Band-Gap and Low HOMO Energy Level

Difluorobenzoxadiazole-based Conjugated Polymers for Efficient Non-Fullerene Polymer Solar Cells with Low Voltage Loss

ChemInform Abstract: Review on the Recent Progress in Low Band Gap Conjugated Polymers for Bulk Hetero‐Junction Polymer Solar Cells

Dithienocoronene Diimide Based Conjugated Polymers As Electron Acceptors for All-Polymer Solar Cells

Rational Design of Near‐Infrared Polymer Acceptors Using Steric Hindrance Strategy for High‐Performance Organic Solar Cells

Difluoroterthiophene as promising block to build highly planar conjugated polymer for polymer photovoltaic cells

Side-chain effect on cyclopentadithiophene/fluorobenzothiadiazole-based low band gap polymers and their applications for polymer solar cells

Asymmetric Diketopyrrolopyrrole Conjugated Polymers for Field-Effect Transistors and Polymer Solar Cells Processed from a Nonchlorinated Solvent.

Synthesis And Photovoltaic Properties From Inverted Geometry Cells And Roll-To-Roll Coated Large Area Cells From Dithienopyrrole-Based Donor-Acceptor Polymers