Diode-Pumped Tm:YAG Ceramic Laser
Wen-Xin Zhang,Yu-Bai Pan,Jun Zhou,Wen-Bin Liu,Jiang Li,Ben-Xue Jiang,Xiao-Jin Cheng,Jian-Qiu Xu
DOI: https://doi.org/10.1111/j.1551-2916.2009.03220.x
IF: 4.186
2009-01-01
Journal of the American Ceramic Society
Abstract:Highly transparent Tm:YAG ceramic was fabricated by a solid-state reaction and vacuum sintering. The optical properties, the microstructure, and the laser performance of the Tm:YAG ceramic were investigated. A Tm:YAG ceramic with an average grain size of similar to 10 mu m was obtained by sintering at 1750 degrees C for 10 h. The in-line transmittance was 84.0% at 2015 nm. The absorption coefficients at 681 and 785 nm were 8.23 and 3.27 cm(-1), respectively. The grain boundaries were clean and no secondary phase was observed. The 6 at.% Tm:YAG ceramic slab (1.2 mm x 5 mm x 6 mm) was end-pumped by a laser diode at 792 nm, and the maximum output power of 4.5 W was obtained with a slope efficiency of 20.5% at 2015 nm.