Abstract:This paper proposes an all−digital calibration algorithm that utilizes a reference channel to suppress the timing mismatch in the Time−Interleaved Analog−to−Digital Converter (TIADC). The output of the reference channel is aligned with each sub−channel in turn, therefore enabling the simultaneous sampling and conversion of the same input signal. First, the statistical characteristics across the channels are employed for estimating the timing mismatch; then, by comparing the output difference between the reference channel and the sub−channels that are sampled simultaneously, the deviation of the derivator can be calibrated. Finally, combining both calibration results yields an accurate final output. This proposed algorithm provides an effective solution to improve TIADC performance in high−speed data acquisition systems. The proposed architecture is applied to a 12−bit 2.4 GS/s four−channel TIADC model, and then its effectiveness is verified. The simulation results exhibit that the Effective Number Of Bits (ENOB) at an input signal frequency of 984 MHz shows a remarkable improvement from 6.88 bits to 11.92 bits. The effectiveness of this technique is also demonstrated through the off−chip calibration of a commercial 12−bit four−channel 2 GS/s TIADC using a 680 MHz input signal that is based on the actual chip results.

Estimation of Channel Mismatches in Time-Interleaved Analog-To-Digital Converters Based on Fractional Delay and Sine Curve Fitting

A Simple Estimation Technique for Timing Skew Mismatch in Time-Interleaved Analog-to-Digital Converter Systems

The fast time-interleaved ADC channel mismatch calibration method based on equivalent sampling and dynamic reference point

Estimation of Channels Mismatch in Time-interleaved ADC System Based on LS

An Efficient All-Digital Timing Skew Estimation Method for Time-Interleaved ADCs

Estiamtion and Correction of Mismatch Errors in Time-Interleaved Adcs

Calculation of Channel Mismatch Error in Time-Interleaved ADC System Using Least-Squares Method

Estimation and Correction of Gain Mismatch and Timing Error in Time-Interleaved ADCs Based on DFT

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

A New All-Digital Background Calibration Technique for Time-Interleaved ADC Using First Order Approximation FIR Filters

Calibration of Channel Mismatches in Time-interleaved ADCs Based on Multi-Frequency Reference Error Method

A Digital Timing Mismatch Calibration Technique in Time-Interleaved ADCs.

Calibration of Frequency Response Mismatches in Time‐interleaved Analog‐to‐digital Converter Based on Adaptive Method

A Novel Multi-Channel Mismatch Estimation Method for Parallel Time-Interleaved System

All-Digital Calibration of Timing Mismatch Error in Time-Interleaved Analog-to-Digital Converters.

A Digital-Background TIADC Calibration Architecture and a Fast Calibration Algorithm for Timing-Error Mismatch

An Improved All-Digital Background Calibration Technique for Channel Mismatches in High Speed Time-Interleaved Analog-to-Digital Converters

A Digital-Mixing-based Method for Timing Skew Estimation in Time-Interleaved ADCs

A Background Correlation-Based Timing Skew Estimation Method for Time-Interleaved ADCs

Machine-Learning Based Mismatch Calibration for Time-Interleaved ADCs

An Adaptive Blind Calibration Technique for Frequency Response Mismatches in M-Channel Time-Interleaved ADCs